PVC Coated Fabric Technical Grade for Farming – Knife Coated
PVC Coated Fabric Technical Grade for Farming – Knife Coated
ISO 9001 ISO 14001 ISO 45001 CE

PVC Coated Fabric Technical Grade for Farming – Knife Coated

<p><strong>PVC Coated Tarpaulin for Farming</strong> with 500–1000 gsm range, polyester base fabric up to 1300D×1300D, and double-sided PVC coating for waterproof performance.</p> <ul> <li>Knife-coated construction ensures strong adhesion between base fabric and coating, delivering reliable tensile strength and seam integrity</li> <li>Heat-sealed edges with 5mm rope and reinforced aluminum eyelets prevent failure at high-stress flex points</li> </ul> <p>Supported by 100% pre-shipment inspection, dedicated QA at every production stage, and a 10-person R&D team handling custom specifications.</p>

Quality
Certified
OEM/ODM
Support
20+ Countries
Exported
+86 137 9310 1270 Reply within 24h

Process Control Over Coating Weight — Every roll of this PVC coated tarpaulin for farming undergoes in-process GSM verification, matching base fabric denier and coating composition to the stated specification before dispatch.

Technical Specifications

Parameter Value
Product Type PVC Coated Tarpaulin
Base Fabric Composition Polyester Base Fabric + Double-Sided PVC Coating
Available Weight Range 350gsm, 400gsm, 420gsm, 500gsm, 600gsm, 650gsm, 750gsm, 900gsm
Available Yarn Count 500D×840D, 500D×1000D, 1000D×1000D, 1000D×1300D, 1300D×1300D, 1000D×2000D
Available Mesh Density 30×19, 20×20, 30×15
Available Thickness 0.29mm, 0.32mm, 0.38mm, 0.44mm, 0.46mm, 0.55mm, 0.65mm
Tensile Strength (Warp) 1650N – 3900N (varies by grade)
Tensile Strength (Weft) 1600N – 3500N (varies by grade)
Surface Finish Smooth, leather-like texture
Waterproof Performance Fully waterproof coated construction
Flame Retardant Grade Flame retardant — confirm the grade required for your market
UV Treatment Anti-UV — test basis to be confirmed per order
Anti-Mildew Anti-mildew treated
Brittle Temperature ≤ -50 to -60 ℃
Softening Temperature ≥ 80 ℃
Melting Point 212 ℃
Density 1.15–2.00 g/cm³
Edge Finishing 5mm thick rope without splicing, high temperature heat sealed seamless edge wrapping
Eyelet Options 3cm enlarged aluminum alloy buttonhole, reinforced corners on all sides
Printing Printable, Customized
Key Features Waterproof, Heavy Metal Free, Flexible, Self Clean, Anti Mildew
Certifications ISO, CE

Application Suitability

Application Exposure & Requirement
Succulent plant rainproof cover Continuous UV exposure, light handling, seasonal rain and dew cycles
Garden plants rainproof cover film Soil moisture contact, direct sun, wind-driven rain abrasion
Balcony windows rainproof tarpaulin Repeated opening and closing, UV exposure, urban pollution and dust
Garden furniture rainproof cover Permanent outdoor placement, UV, standing water pooling on flat surfaces
Terrace pergolas rain cover Tension loading, wind uplift, seasonal thermal expansion and contraction
Outdoor car rainproof cloth UV degradation, hail impact, abrasion against body panels
Pond and reservoir liner Continuous water immersion, soil chemistry, puncture from substrate

Why GSM Alone Does Not Tell You How Strong the PVC Coated Tarpaulin Will Be

Base fabric denier and weave density contribute more to tensile and tear performance than coating weight alone.

A common source of dispute between buyer and supplier is that the PVC coated tarpaulin arrives lighter than the GSM stated on the quotation [NEED_CITE: tensile and tear test methods for coated fabrics per ISO 1421]. This happens when coating weight is increased to reach the target GSM while the base fabric denier is downgraded — the material hits the weight but lacks the structural backbone. Technical buyers who specify only by total weight, without confirming the yarn count and mesh density underneath, expose themselves to fabric that stretches or tears under load despite matching the scale reading.

PVC coated tarpaulin base fabric denier and coating weight composition

How Polyester Yarn Denier and Mesh Count Govern Structural Integrity

The base fabric in this PVC coated tarpaulin range runs from 500D×840D through 1000D×2000D. Denier determines the thickness of each yarn filament, and the mesh count — such as 30×19 or 20×20 — defines how tightly those yarns are woven per unit area. A denser weave with lower denier yarn can produce a similar GSM to a loose weave with heavier yarn, but the tear propagation path differs substantially. Tightly woven lower-denier fabric tends to arrest a tear quickly because each intersecting yarn acts as a stopping point.

PVC Double-Sided Coating: Composition, Weight, and Adhesion

The double-sided PVC coating contributes the balance of the total GSM across the 350gsm to 900gsm range. Coating weight is not merely a filler — it determines the fabric’s puncture resistance, waterproof sealing, and suitability for heat welding. Heavier coating on a properly matched base fabric yields a PVC coated tarpaulin that can be hot-air welded or high-frequency bonded with the weld achieving strength comparable to the parent material [NEED_CITE: high-frequency welding parameters for PVC coated polyester fabric]. Insufficient coating weight relative to the base fabric denier, by contrast, leads to poor adhesion and delamination at flex points over time.

Reading the Specification Table for Your Application

When you compare the 350gsm grade (500D×840D, 0.29mm thickness, 1650N warp tensile) against the 900gsm grade (1000D×2000D, 0.65mm thickness, 3900N warp tensile), the jump in tensile values comes primarily from the heavier denier yarn rather than the coating alone. Thickness increases from 0.29mm to 0.65mm across the range, correlating with both higher denier and more coating mass. For farming applications such as greenhouse covers and rain shelters, a mid-range grade around 500gsm to 650gsm often balances handling weight with sufficient UV and rain resistance. For pond liners and heavy-duty equipment covers, the 750gsm to 900gsm range provides the puncture resistance and water immersion durability that lighter grades cannot sustain.

Cross-section detail of PVC coating layers on polyester base fabric

The Hidden Cost of Specification Mismatch in Farming Covers

When a farming tarpaulin is ordered at a target GSM without verifying the underlying denier, the result is often a cover that stretches under wind load, develops pinhole tears at tie-down points, or delaminates after a season of UV exposure [NEED_CITE: coating delamination mechanisms in PVC polyester laminates]. Batch-to-batch shade variation is another recurring issue — rolls produced in different coating runs can show visible colour differences once installed side by side over a pergola or greenhouse frame. Specifying both the base fabric yarn count and the coating weight, and requesting a batch colour reference, prevents these failures before they reach the field.

Why This Source Supports Technical Specification

A 10-person R&D team handles material selection and sample development, producing samples within days so that the exact denier, coating weight, and treatment package can be confirmed before bulk production. Three full production lines and 36 sets of professional equipment support volume capacity while maintaining batch consistency. Dedicated QA/QC at every production stage includes roll-by-roll GSM verification and colour reference checks, not just sampling from the first and last roll. Nearly 30 years of coated fabric process control means coating weight and base fabric adhesion are managed as linked variables, not independent targets.

Documentation & Verification

  • Material specification sheet stating exact GSM, base fabric denier, weave density, and coating composition per grade
  • Test reports for UV and flame-retardant grades matched to the production batch, not generic certificates
  • Pre-shipment inspection record with roll-by-roll GSM verification and batch colour reference
  • ISO and CE certificates confirming quality management and product compliance scope
  • Roll packing list and certificate of origin for customs and import clearance

Fabrication, Handling & Storage

  • Hot air welding at 400–550 ℃ suits the 500gsm–900gsm range; adjust dwell time to the specific coating thickness before full production runs
  • High-frequency bonding works on double-sided PVC coating grades; confirm compatibility with your chosen denier and GSM
  • 3cm aluminum alloy eyelets with reinforced corners distribute tie-down load; add extra reinforcement at high-stress pull points
  • Store rolls upright on pallets to prevent permanent creasing across the full width of the coated surface
  • Unroll and allow the PVC coated tarpaulin to relax at ambient temperature before cutting in cold weather below 5 ℃
  • Clean with mild detergent and soft brush; avoid solvents that degrade the PVC coating and self-clean surface treatment

What to Include in Your Enquiry

Provide the specific farming or outdoor application, expected exposure conditions, and the GSM grade or thickness range you are targeting. If your market requires flame-retardant or anti-UV certification, state the standard or grade so that test reports can be prepared alongside your production batch. Indicate whether you need roll stock by the metre or finished sheets with eyelets, edge finishing, and custom printing.

Frequently Asked Questions

Q: How do I verify that the GSM I receive matches what was quoted?
A: Request a material specification sheet before order confirmation that lists the base fabric denier, mesh count, and total coated GSM for your selected grade. On arrival, cut a measured sample from the interior of the roll — not the edge — and weigh it. Compare the result against the specification sheet. Roll-by-roll GSM verification is included in the pre-shipment inspection record.

Q: Which flame-retardant grade applies to my market?
A: Different markets require different standards — M2, B1 per DIN 4102, NFPA 701, or other classifications. State your target standard when enquiring so the correct additive package is formulated into the PVC coating. Test reports specific to your production batch will be supplied to confirm compliance rather than relying on generic certificates.

Q: What supports the anti-UV treatment claim?
A: Anti-UV additives are compounded into the PVC coating during production. The specific exposure duration and test basis depend on the additive concentration and grade selected. Request the UV stability test report matched to your batch so you can verify performance against your application’s expected sun exposure conditions.

Q: Which welding method is best for this PVC coated tarpaulin?
A: Hot air welding is widely used for on-site repairs and field fabrication across the 350gsm–900gsm range. High-frequency hot melt welding produces stronger bonds for factory fabrication of finished covers and structures. The optimal method depends on your base fabric denier and coating thickness — confirm with the R&D team during sample development.

Q: How is colour consistency managed across multiple rolls?
A: Each production batch is assigned a colour reference number, and rolls within the same order are matched to that reference. When ordering for installations where rolls will be visible side by side — such as pergola covers or greenhouse cladding — specify that all rolls come from a single coating run to avoid shade variation.

Accepting Inquiries

Get a Custom Quote for
PVC Coated Fabric Technical Grade for Farming – Knife Coated

Fill in your requirements and our sales team will respond within 24 hours with a detailed quotation. We support sample orders, bulk production, and OEM/ODM customization.

01
Submit Inquiry
Describe your needs and quantity
02
Sample Confirmation
We prepare samples for your approval
03
Quotation & Order
Formal quote, contract and payment
04
Production & Ship
Full QC inspection before delivery

Product Inquiry Form

Sending...

By submitting this form, you agree to be contacted by our sales team. We respect your privacy and will never share your information.

Related Products

You May Also Like

520gsm PVC Coated Tarpaulin Fabric for Truck Cover | Laminated Grade
PVC Coated Fabric

520gsm PVC Coated Tarpaulin Fabric for Truck Cover | Laminated Grade

<p><strong>PVC Coated Tarpaulin Fabric, 400–1500 g/m², 500D–2000D, Hot Melt Coated</strong> — Lamination and hot melt coating deliver higher peel and weld tear strength than standard calendered fabric.</p> <ul> <li>Base fabric denier and GSM are matched to tensile and tear load, not over-specified</li> <li>Flame retardant, anti-static and UV treatments available with test reports</li> <li>3–5 year outdoor weather resistance verified by ISO and CE documentation</li> </ul> <p>Supported by 10-person R&D for sample development within days and 100% pre-shipment inspection across all three production lines.</p>

View Details
Fire Retardant PVC Coated Fabric for Warehouse – Laminated Grade
PVC Coated Fabric

Fire Retardant PVC Coated Fabric for Warehouse – Laminated Grade

<p><strong>Fire Retardant PVC Coated Tarpaulin, 400–1500 g/m², 500D–2000D Base, Hot Melt Coated</strong> — flame retardant to B1 standard, with anti-static and UV treatment options across medium to super heavy-duty grades.</p> <ul> <li>Coating adhesion and base fabric denier jointly define weld integrity at seams — hot melt coating delivers consistent peel strength for high-flex applications.</li> <li>GSM maps directly to tensile and tear performance; specify denier and coating weight to match structural or transport load requirements.</li> </ul> <p>Backed by nearly 30 years of coated fabric process control and 100% pre-shipment inspection on every roll.</p>

View Details
PVC Coated Polyester Fabric with Flame Retardant – Technical Grade
PVC Coated Fabric

PVC Coated Polyester Fabric with Flame Retardant – Technical Grade

<p><strong>PVC Coated Polyester Fabric</strong> — 450-900 g/m², 500D×500D yarn count, double-sided coating with overall waterproof sealing. Hot air weldable for field repair and custom fabrication, delivering reliable seam integrity at flex points. Base fabric denier and coating weight are matched to deliver verified tensile and tear performance, supported by anti-UV treatment for extended outdoor service. Backed by 30 years of coating process control and 100% pre-shipment inspection on every roll.</p>

View Details
PVC Coated Polyester Fabric Technical Grade for Tarpaulin Cover
PVC Coated Fabric

PVC Coated Polyester Fabric Technical Grade for Tarpaulin Cover

<p><strong>PVC Coated Tarpaulin Fabric, 500D-500D Polyester Base, 450-900 g/m²</strong> — double-sided coated for reliable GSM consistency across the full roll length.</p> <p>Coating weight and base fabric denier together determine tensile and tear performance, not GSM alone. The double-sided PVC coating method ensures stable adhesion and predictable hot air welding behaviour at flex points where covers experience the most stress.</p> <ul> <li>Water resistant, anti-UV and flame retardant treatments integrated with test documentation</li> <li>Smooth leather-like surface suitable for custom colour and pattern printing</li> <li>Supported by nearly 30 years of coating process control and 100% pre-shipment inspection</li> </ul>

View Details

Ready to Place a Bulk Order or Need a Sample?

Factory-direct pricing · Full QC inspection · 20+ countries shipped · OEM/ODM supported