PVC Coated Fabric 1000d | Technical Grade
PVC Coated Fabric 1000d | Technical Grade
ISO 9001 ISO 14001 ISO 45001 CE

PVC Coated Fabric 1000d | Technical Grade

<p><strong>PVC Coated Tarpaulin 500gsm–1000gsm, 1000D Polyester Base, Fire Retardant</strong> — double-sided coated with heat-sealed seamless edge wrapping and 3cm aluminum alloy eyelets every 1 meter for secure tie-down under dynamic transport loads.</p> <p>Base fabric denier and PVC coating weight together determine tensile performance — 1000D×1000D at 600gsm delivers 2500N warp strength for side curtains and top roofs, while higher denier grades at 750gsm+ suit membrane and inflatable structures where seam integrity under flex is critical.</p> <ul> <li>Tensile strength: 50–80MPa with brittle temperature ≤ -50℃</li> <li>Anti-UV, waterproof and heavy metal free treatments available</li> <li>Custom width, length and print with samples developed within days</li> </ul> <p><strong>100% pre-shipment inspection on every roll</strong>, supported by material specification sheets and test reports for your verification before dispatch</p>

Quality
Certified
OEM/ODM
Support
20+ Countries
Exported
+86 137 9310 1270 Reply within 24h

Coating Adhesion Control — Every roll of PVC coated tarpaulin 1000D denier base fabric is produced under strict hot-melt process monitoring to ensure consistent coating weight and fabric-to-coat bonding before it leaves the line.

Technical Specifications

Parameter Value
Product Type PVC Coated Tarpaulin
Base Fabric Denier 1000D×1000D
Mesh Count 20×20
Weight (GSM) 600 GSM
Total Thickness 0.44 mm
Coating Material Double-sided PVC over polyester base
Tensile Strength (warp) 2500 N
Tensile Strength (weft) 2200 N
Flame Retardant Available in flame retardant grades — confirm the grade required for your market
UV Treatment Anti-UV treatment available — confirm test basis for your target climate
Waterproof Yes, fully sealed PVC coating
Anti-Mildew Yes
Temperature Range Brittle ≤ -50 °C to -60 °C; Softening ≥ 80 °C; Melting point 212 °C
Edge Treatment 5 mm rope without splicing, high-temperature heat-sealed seamless edge wrapping
Eyelet Options 3 cm enlarged aluminium alloy buttonhole, brass eyelets at 1 m intervals
Reinforcement Reinforced corners on all sides
Key Features Heavy metal free, flexible, printable for custom branding, self-clean surface

Application Suitability

Application Exposure & Requirement
Truck side curtain Constant flexing at load points, road debris abrasion, UV and rain exposure
Trailer top roof Standing water pooling, wind uplift stress, thermal expansion cycles
Container roof cover Salt-air corrosion in port environments, heavy rainfall, mechanical handling damage
Outdoor event tent (block-out) Crowd contact, repeated assembly and teardown, direct sun exposure
Inflatable structure fabric Internal air pressure stress, dynamic folding and unfolding, puncture risk
Construction temporary shelter Scaffolding contact, wind load, dust and chemical splash

Why Denier and Weave Density Matter More Than GSM Alone

A 600 GSM PVC coated tarpaulin 1000D denier base fabric carries its strength in the yarn structure, not just the coating weight.

Technical buyers often see a quotation listing a target GSM and assume that number alone defines durability. In practice, the base fabric denier and mesh count determine how the material responds when a truck side curtain flexes under highway wind load or when a tensile structure bears sustained tension. A lighter-denier yarn with a higher mesh count can reach the same GSM as a heavier-denier yarn with a looser weave, yet the two fabrics behave very differently under tear propagation and seam stress. [NEED_CITE: tensile and tear test methods for coated fabrics per ISO 1421] Specifying by denier and density together — rather than by coating weight in isolation — is how fabricators avoid discovering that the weld line fails before the fabric does.

PVC coated tarpaulin 1000D polyester base fabric weave detail

Base Fabric Architecture and Load Response

The 1000D×1000D polyester yarn in this PVC coated tarpaulin 1000D denier base fabric provides a balanced tensile platform across both warp and weft directions. A 20×20 mesh count spaces the yarns to allow adequate PVC penetration during coating, which directly influences peel strength at heat-sealed joints. When fabricators weld panels for side curtains or membrane structures, the coating must bond to itself through the mesh gaps — a denser weave can restrict this flow and reduce seam adhesion.

Coating Weight and Fabrication Behaviour

At 600 GSM with a total thickness of 0.44 mm, this grade sits in the mid-heavy range where high-frequency hot melt and hot air welding both perform well. The double-sided PVC coating over the polyester base provides sufficient material volume for strong thermal bonds without the excessive stiffness that heavier grades introduce during folding and roll handling. For inflatable and membrane structure applications, this balance between flexibility and tensile capacity allows the fabric to conform to curved frames while maintaining dimensional stability under sustained air pressure or wind load. [NEED_CITE: DIN 4102 fire classification for building materials]

Temperature Boundaries in Field Service

The stated brittle temperature of ≤ -50 °C to -60 °C and softening point of ≥ 80 °C define the operational envelope for cold-climate transport and hot-weather construction use. Below the brittle threshold, the PVC coating loses flexibility and becomes prone to cracking at fold lines — a concern for fleet operators running winter routes. Above the softening temperature, the coating becomes pliable enough that tensioned installations may creep under sustained load. The melting point at 212 °C confirms the thermal headroom available during high-frequency welding without risk of base fabric damage.

Double-sided PVC coating layer cross-section on 1000D polyester base

The Hidden Cost of Specifying on Weight Alone

When a buyer specifies a target GSM without confirming the underlying denier and weave, the delivered rolls may meet the weight check but underperform at the seams. PVC coated tarpaulin 1000D denier base fabric specified only by weight can mask a substitution to lighter yarn with compensating coating thickness, which increases stiffness and reduces tear resistance at flex points. [NEED_CITE: seam failure in coated fabrics under cyclic loading] Truck side curtains fabricated from such material often show weld-line separation within the first season of service, while the body of the fabric remains intact. Colour variation between rolls sourced from different base fabric batches compounds the problem when panels are installed side by side on a single trailer.

Procurement Confidence Through Process Control

Every production run of this PVC coated fabric is backed by in-house coating weight and adhesion monitoring across three full production lines. The 10-person R&D team handles material selection and sample development so fabricators can validate welding parameters and colour match before committing to a production order. Dedicated quality checks at each stage — base fabric inspection, coating application, and finished roll review — ensure that the denier, mesh count and GSM on the specification sheet match what arrives at the fabrication floor. Pre-shipment inspection covers every roll, not a statistical sample.

Documentation & Verification

  • Material specification sheet listing 1000D×1000D denier, 20×20 mesh and 600 GSM per roll
  • Test report for flame retardant and anti-UV grades supplied with the applicable standard reference
  • Pre-shipment inspection record confirming coating weight and dimensional accuracy before dispatch
  • ISO and CE certificates provided for compliance and import documentation
  • Roll packing list with net weight and roll count for container loading verification

Fabrication, Handling & Storage

  • High-frequency welding at 0.44 mm thickness requires calibrated dwell time to achieve full coating penetration
  • Brass eyelets at 1 m spacing distribute tie-down loads across the 1000D base fabric without pull-through
  • Heat-sealed edge wrapping prevents delamination at cut edges during repeated rolling and unrolling
  • Store rolls upright on pallets to avoid flat-spotting the 600 GSM coating under self-weight
  • Clean with mild detergent only; solvent-based cleaners can degrade the PVC surface and reduce print adhesion

Requesting a Technical Quotation

Provide your application type, expected mechanical and environmental exposure, and the fire safety classification required in your target market. Specify whether you need roll stock at standard width or custom slit dimensions, and indicate annual volume to align production scheduling. If colour matching or printed branding is required, request a pre-production sample to confirm shade consistency and print adhesion before the full order runs.

Frequently Asked Questions

Q: How is the 1000D denier and 600 GSM verified before shipment?
A: Each roll undergoes a weight and denier check during pre-shipment inspection. The material specification sheet accompanying your order documents the confirmed GSM, base fabric denier and coating weight for every individual roll, so you can reconcile what was quoted against what arrives at your facility.

Q: Which flame retardant grade can be supplied for my market?
A: Flame retardant treatment is available in multiple grades. Confirm the classification required for your jurisdiction — such as DIN 4102, NFPA 701 or local building code — and the applicable test report will be included with your shipment documentation.

Q: What welding method works best with this 0.44 mm thickness?
A: Both high-frequency hot melt and hot air welding are suitable for this grade. We recommend running a sample panel to establish optimal temperature and dwell time settings for your equipment, ensuring the coating fully penetrates the 20×20 mesh for maximum seam adhesion.

Q: Can I order custom widths with consistent colour across rolls?
A: Custom widths are available subject to production line capability. For multi-roll orders installed side by side, we schedule all rolls from the same coating batch to maintain colour uniformity and provide a sample for your approval before the full production run.

Accepting Inquiries

Get a Custom Quote for
PVC Coated Fabric 1000d | Technical Grade

Fill in your requirements and our sales team will respond within 24 hours with a detailed quotation. We support sample orders, bulk production, and OEM/ODM customization.

01
Submit Inquiry
Describe your needs and quantity
02
Sample Confirmation
We prepare samples for your approval
03
Quotation & Order
Formal quote, contract and payment
04
Production & Ship
Full QC inspection before delivery

Product Inquiry Form

Sending...

By submitting this form, you agree to be contacted by our sales team. We respect your privacy and will never share your information.

Related Products

You May Also Like

PVC Coated Fabric with Waterproof Treatment – Technical Grade
PVC Coated Fabric

PVC Coated Fabric with Waterproof Treatment – Technical Grade

<p><strong>PVC Coated Fabric 450 g/m², Woven Base, Custom Width</strong> — waterproof vinyl coating with full PVC adhesion for industrial cover applications.</p> <p>Coating weight and base fabric denier together determine tear strength and weld performance — not GSM alone. Our knife-coated process ensures consistent adhesion across every roll, reducing seam failure at high-stress flex points.</p> <p>Backed by 30 years of coated fabric production, 100% pre-shipment inspection, and in-process QA at every stage.</p> <ul> <li>Waterproof PVC vinyl coating on woven base fabric</li> <li>ISO and CE certified production facility</li> <li>Custom width, length and treatment options</li> <li>Full material specification sheet with every order</li> </ul>

View Details
PVC Coated Fabric with Fireproof Waterproof – Technical Grade
PVC Coated Fabric

PVC Coated Fabric with Fireproof Waterproof – Technical Grade

<p><strong>PVC Coated Tarpaulin 700gsm / 850gsm / 900gsm, Waterproof & Fireproof</strong> — engineered for truck cargo covers and industrial outdoor protection. Coating weight and base fabric construction are controlled together to deliver consistent tensile and tear strength across each roll, while flame retardant and anti-static treatment options align with specific site safety requirements. Dedicated QA/QC inspects every production stage with 100% pre-shipment verification to ensure GSM and treatment performance match your specifications.</p>

View Details
PVC Coated Tarpaulin for Flatbed Truck – Knife Coated
PVC Coated Fabric

PVC Coated Tarpaulin for Flatbed Truck – Knife Coated

<p><strong>PVC Coated Tarpaulin</strong> with water resistant, anti-UV treatment, and flame retardant protection in double-faced construction — designed for flatbed truck and trailer cargo covering. Knife coated fabric where base fabric denier and coating weight together determine tensile and tear performance for long-haul transport exposure. Produced on 3 full lines with dedicated QA at every stage and 100% pre-shipment inspection before dispatch.</p>

View Details

Ready to Place a Bulk Order or Need a Sample?

Factory-direct pricing · Full QC inspection · 20+ countries shipped · OEM/ODM supported