PVC Coated Tarpaulin for Truck Cargo Cover – Technical Grade
PVC Coated Tarpaulin for Truck Cargo Cover – Technical Grade
ISO 9001 ISO 14001 ISO 45001 CE

PVC Coated Tarpaulin for Truck Cargo Cover – Technical Grade

<p><strong>PVC Coated Tarpaulin for Truck Cargo Cover, 700gsm–900gsm</strong> — engineered with flame retardant, anti-static, anti-cold, and anti-mildew treatment options for transport and logistics applications.</p> <ul> <li>Base fabric and coating weight jointly determine tensile and tear performance under load flex</li> <li>Multiple GSM grades allow spec-to-need matching, avoiding over- or under-engineering</li> <li>Coating adhesion and seam weld strength critical at high-stress flex points during transit</li> </ul> <p>Supported by a 10-person R&D team handling custom sizing, treatment selection, and rapid sample development within days.</p>

Quality
Certified
OEM/ODM
Support
20+ Countries
Exported
+86 137 9310 1270 Reply within 24h

Process Control Over Coating Weight — verified GSM on every roll of PVC coated tarpaulin, backed by in-line coating measurement and pre-shipment weight audit.

Technical Specifications

Parameter Value
Product Type PVC Coated Tarpaulin
Material PVC Coated Fabric
Weight Options 700gsm / 850gsm / 900gsm
Treatment Options Flame Retardant (grade not stated); Anti-Static (standard not stated); Anti-Cold; Anti-Mildew
Waterproof Yes
Weather Resistance 1–3 years
Product Format Roll and cut sizes available
Company Certification ISO and CE

Application Suitability

Application Exposure & Requirement
Truck cargo cover Constant flexing, road debris abrasion, UV exposure, wind lift at highway speed
Trailer side curtain Repeated sliding and folding, contact with metal frame edges, fuel and oil splash
Equipment protection on site Dust ingress, rain pooling, mechanical impact from loading operations
Outdoor transit load wrapping Multi-day weather exposure, tie-down tension at hem and eyelet zones

Why Coating Weight and Base Fabric Define Real Tarpaulin Performance

A stated GSM on the quotation means little if the coating-to-fabric ratio is uncontrolled.

Technical buyers reviewing PVC coated tarpaulin for truck cover applications often discover that the material arriving on site feels lighter or behaves differently than expected. The reason is not always dishonesty — sometimes the base fabric denier and weave density shift between batches, and the coating weight adjusts to hit the target number. The result is a fabric that passes a scale test but fails when the load flexes at the weld seam or the hem takes repeated tie-down tension. What matters is the combination of base fabric construction and coating adhesion, not the GSM figure alone [NEED_CITE: tensile and tear test methods for coated fabrics per ISO 1421].

Coating Method and Its Effect on Weld Behaviour

The way PVC is applied to the base fabric determines how the material responds during fabrication. When a PVC coated tarpaulin is cut and joined by hot-air or wedge welding, the coating must melt uniformly and bond to itself without delaminating from the yarns beneath. Inconsistent coating thickness leads to uneven weld penetration — the seam may look intact on the surface but peel apart when the truck cover flexes under road vibration. For fleet operators converting fabric into fitted cargo covers, requesting a peel strength figure alongside the GSM gives a clearer picture of how the material will perform after fabrication.

Functional Treatments and What to Confirm Before Ordering

Several treatment options are available across the PVC coated tarpaulin range, including flame retardant, anti-static, anti-cold, and anti-mildew variants. However, specifying "flame retardant" without a grade can create compliance risk at the destination market — different regions apply different classification systems, and a test report aligned with the buyer’s local standard is essential [NEED_CITE: DIN 4102 fire classification for building materials]. Anti-static claims similarly require a documented test basis. Before placing a bulk order, request the specific test report that matches the regulatory framework your end user must satisfy.

Reading GSM, Base Fabric, and Coating Together

The three GSM options — 700gsm, 850gsm, and 900gsm — represent different balances of base fabric density and PVC coating mass. A higher GSM does not automatically mean higher tear resistance; a heavy coating on a loosely woven base fabric can crack at fold lines in cold weather, while a lighter coating on a tightly woven, high-denier base may outperform it in tear propagation resistance. The coating method — whether knife-over-roll, lamination, or calendering — also affects peel strength and weld compatibility. Knife-coated fabrics typically offer stronger adhesion between the PVC layer and the base yarns, which matters when fabricated truck covers are subjected to sustained mechanical stress at seams and hems. For technical buyers comparing grades, requesting the base fabric denier, weave count, and coating weight breakdown provides a far more reliable basis for material selection than GSM alone [NEED_CITE: relationship between GSM, denier, and tensile performance in coated fabrics].

PVC coating layer cross-section showing base fabric weave and coating adhesion on PVC coated tarpaulin

What Happens When the Specification Is Wrong

A truck cover made from a grade that is too light for the route conditions will show early signs of failure — not in the body of the fabric, but at the weld seams and the reinforced hem edges where tie-down straps concentrate load. If the flame retardant grade does not match the destination market’s fire safety code, the entire batch may be rejected at inspection, leaving the fleet operator without cover and the supplier facing a costly return. Colour variation between rolls in the same shipment becomes visible once two panels are installed side by side on a trailer, forcing a re-order and a missed delivery window. These failures are preventable when the buyer specifies the coating weight, base fabric construction, and treatment standard at inquiry stage rather than accepting a generic product code [NEED_CITE: common causes of tarpaulin weld seam failure in transport applications].

Why Source This PVC Coated Tarpaulin Here

Nearly 30 years of focused production on coated fabric gives the manufacturing team deep process control over coating weight consistency — each roll of PVC coated tarpaulin is measured against the stated GSM before it leaves the line. Three full production lines and 36 sets of professional equipment support bulk roll output without sacrificing the ability to run short batches for custom widths or colours. A 10-person R&D team handles material selection, pattern printing requests, and sample development, typically turning samples around within days. Dedicated QA/QC inspection covers every production stage, and 100% pre-shipment inspection is standard — not an optional extra. ISO and CE certification underpins the documentation package for export compliance.

Documentation & Verification

  • Material specification sheet stating GSM, base fabric denier, and coating type for each grade ordered
  • Test reports for flame retardant and UV grades provided where applicable to the selected treatment
  • Pre-shipment weight verification per roll against the quoted GSM
  • ISO and CE certificates included for customs and compliance submissions
  • Roll packing list with individual roll dimensions and net weight
  • Certificate of origin prepared for destination market import requirements

Fabrication, Handling & Storage

  • Hot-air weld temperature and speed should be tested on a sample piece of the selected GSM grade before full production
  • Hem reinforcement must account for the specific coating thickness of 700gsm, 850gsm, or 900gsm to prevent delamination under tie-down load
  • Rolls should be stored upright on pallets in a shaded area to avoid flat-spotting and surface transfer marks
  • Anti-cold treated grades remain flexible at low temperatures but still require careful unrolling to avoid crease cracking
  • Cut sizes should be planned to minimise cross-seams in high-flex zones of the truck cover
  • Clean fabricated covers with mild detergent only — solvent-based cleaners can degrade the PVC coating surface

Close-up of base fabric weave density and PVC coating bond on PVC coated tarpaulin roll stock

What to Include in Your Inquiry

To receive an accurate specification recommendation, share the vehicle models or cover dimensions you need to fit, the operating climate including temperature range and UV exposure level, and any fire safety or anti-static standards your market requires. If you are buying roll stock for conversion, state the width and roll length that match your cutting table. For finished truck covers, provide drawings or photographs of the trailer with fitting details. Indicate whether you need samples for weld testing and colour confirmation before committing to a production run.

Frequently Asked Questions

Q: How do I verify the actual GSM matches the quotation when rolls arrive?
A: Request the pre-shipment inspection record that documents per-roll weight measurement. You can also cut a measured sample from each roll, weigh it, and compare the result to the stated GSM. Discrepancies should be reported before fabrication begins, as cutting the material voids most return claims. Our QA process includes 100% weight verification before dispatch.

Q: What flame retardant grades are available and how do I choose?
A: Flame retardant treatment is available across the PVC coated tarpaulin range, but the specific grade must match your destination market’s fire safety standard. Confirm whether your market requires DIN 4102, NFPA 701, or another classification, and request the corresponding test report before ordering. We develop samples with the selected treatment for your verification.

Q: How does GSM relate to tensile and tear strength in truck cover applications?
A: GSM alone does not determine strength — the base fabric denier and weave density are equally important. A 900gsm fabric with a loosely woven base may underperform a well-constructed 850gsm grade in tear propagation resistance. Request the full material specification sheet including base fabric details to make a reliable comparison for your truck cover application.

Q: Can I order custom widths or colours in this PVC coated tarpaulin range?
A: Custom widths, colours, and printed branding are available through the R&D team. Samples are developed within days for your approval before production begins. Minimum order quantities and lead times vary by specification, so provide your target width, colour reference, and estimated annual volume at inquiry stage for a precise quotation.

Accepting Inquiries

Get a Custom Quote for
PVC Coated Tarpaulin for Truck Cargo Cover – Technical Grade

Fill in your requirements and our sales team will respond within 24 hours with a detailed quotation. We support sample orders, bulk production, and OEM/ODM customization.

01
Submit Inquiry
Describe your needs and quantity
02
Sample Confirmation
We prepare samples for your approval
03
Quotation & Order
Formal quote, contract and payment
04
Production & Ship
Full QC inspection before delivery

Product Inquiry Form

Sending...

By submitting this form, you agree to be contacted by our sales team. We respect your privacy and will never share your information.

Related Products

You May Also Like

Factory Direct 20x30 Feet 13mil Heavy-Duty Vinyl Tarps PVC Tarpaulin for Firewood Roof Camping Patio Pool Boat Dump Trailer
PVC Coated Fabric

Factory Direct 20x30 Feet 13mil Heavy-Duty Vinyl Tarps PVC Tarpaulin for Firewood Roof Camping Patio Pool Boat Dump Trailer

Products Description Product Paramenters ProductPVC Coated tarpsWeight250gsm-1500gsmcolorBlue .yellow.black.green.white.etcDenier200DX300D.500DX500D.840DX840D.1000DX1000DSize3x4m.6x8m.8x10m.10x12m or custom madeUV treatmentCustomizedOEM/ODMWarmly welcomedsurfaceGlossy or mattetemperatures ranging-15ºC to 70ºCEnvironmentEco-friendlyWorking...

View Details
Fireproof 500gsm 600gsm PVC Tarpaulin for Truck Cargo Cover – Technical Grade
PVC Coated Fabric

Fireproof 500gsm 600gsm PVC Tarpaulin for Truck Cargo Cover – Technical Grade

<p><strong>Fireproof PVC Tarpaulin Truck Cargo Cover</strong> — available in 500gsm, 600gsm, 700gsm, 850gsm and 900gsm with flame retardant and anti-static treatment options for heavy-duty transport applications.</p> <ul> <li>Engineered for truck cargo protection with high-strength PVC coated canvas construction</li> <li>Waterproof and soundproof properties safeguard sensitive loads during transit</li> <li>Custom sizing and treatment combinations to match specific fleet requirements</li> </ul> <p>Supported by 10-person R&D team with dedicated QA/QC at every production stage and 100% pre-shipment inspection before dispatch.</p>

View Details
450gsm Green PVC Coated Fabric Technical Grade
PVC Coated Fabric

450gsm Green PVC Coated Fabric Technical Grade

<p><strong>PVC Coated Tarpaulin 450 GSM, Green Double-Faced, Anti-UV & Flame Retardant</strong> — knife coated for consistent GSM and adhesion across every roll in your shipment.</p> <p>Base fabric denier and coating weight jointly determine tensile and tear performance, verified at each production stage. Roll-to-roll colour tolerance is held within agreed delta, so panels installed side by side show no visible shade mismatch.</p> <ul> <li>Water-resistant with double-faced green finish</li> <li>Anti-UV and flame retardant treatment with test reports on request</li> <li>Custom width, length and pattern printing available</li> </ul> <p>Backed by 30 years of coating process control and 100% pre-shipment inspection before dispatch.</p>

View Details
PVC Coated Tarpaulin 500gsm 600gsm | Knife Coated
PVC Coated Fabric

PVC Coated Tarpaulin 500gsm 600gsm | Knife Coated

<p><strong>PVC Coated Tarpaulin</strong> — 500gsm to 900gsm, knife coated with flame retardant, anti-static, anti-cold and anti-mildew treatment options for truck cargo covers.</p> <ul> <li>Base fabric denier and coating weight together determine tensile and tear performance, not GSM alone</li> <li>Weld and seam behaviour varies by coating method, critical at flex points on moving loads</li> </ul> <p>Supported by a 10-person R&D team delivering custom sizing and samples within days.</p>

View Details

Ready to Place a Bulk Order or Need a Sample?

Factory-direct pricing · Full QC inspection · 20+ countries shipped · OEM/ODM supported