PVC Coated Woven Tarpaulin Fabric Technical Grade
PVC Coated Woven Tarpaulin Fabric Technical Grade
ISO 9001 ISO 14001 ISO 45001 CE

PVC Coated Woven Tarpaulin Fabric Technical Grade

<p><strong>PVC Coated Tarpaulin</strong> — 250gsm-1500gsm weight range, 200Dx300D to 1000Dx1000D base fabric weaves, glossy or matte finish</p> <ul> <li>Waterproof, UV and flame retardant treatments available</li> <li>Eco-friendly composition with temperature range -15°C to 70°C</li> <li>Tear-resistant and flexible for cut-and-weld fabrication</li> </ul> <p>Base fabric denier selection directly determines tensile and tear performance; GSM reflects coating weight and density working together rather than indicating quality alone. Coating method affects weld seam strength at flex points where material stress concentrates.</p> <p>Backed by dedicated QA/QC inspection at every production stage, three full production lines ensuring reliable bulk delivery capacity, and a 10-person R&D team handling custom specification development.</p>

Quality
Certified
OEM/ODM
Support
20+ Countries
Exported
+86 137 9310 1270 Reply within 24h

Precision Coating Control — every roll is backed by a material specification sheet stating exact GSM, base fabric denier and coating weight, verified at multiple production stages before dispatch.

Technical Specifications

Parameter Value
Product Type PVC Coated Tarpaulin
Weight Range 250gsm–1500gsm (confirm the grade for your application)
Base Fabric Denier 200DX300D / 500DX500D / 840DX840D / 1000DX1000D
Coating Material PVC
Surface Finish Glossy or matte
Temperature Range -15ºC to 70ºC
Waterproof Yes
Flame Retardant Treated (grade not stated — confirm the certification required for your market)
UV Treatment Customized (test basis not stated — request test report for your batch)
Anti-Fungal Treated
Color Options Blue, yellow, black, green, white, and others
Size Options 3x4m / 6x8m / 8x10m / 10x12m or custom made
Standards ISO, CE

Application Suitability

Application Exposure & Requirement
Truck and trailer side curtains Constant flexing at load points, road spray abrasion, UV from prolonged sun exposure
Construction site and equipment covers Wind uplift tension, puncture from scaffolding edges, rain and dust ingress
Agricultural and aquaculture pond liners Permanent water immersion, soil chemistry contact, puncture from substrate
Tent and awning fabrication Repeated folding and unfolding, seam stress at pole points, weather cycling
Inflatable and membrane structures Internal air pressure tension, UV exposure on curved surfaces, weld seam integrity
Industrial equipment wrapping Chemical splash resistance, abrasion from handling, tight folding for storage

Why the PVC Coated Tarpaulin Fabric You Test Is Not the Fabric That Arrives

A quoted GSM means nothing without a verified weight test tied to the specific roll you receive.

Technical buyers regularly compare supplier quotations on a price-per-kilogram basis, assuming the stated 650 GSM or 900 GSM represents the actual coated fabric mass. In practice, the material that arrives on the loading dock can be lighter than the quoted specification — a gap that only becomes visible when tensile testing reveals lower-than-expected strength values. I have seen projects where the weld seam failed before the fabric body did, not because the welding parameters were wrong, but because the base fabric denier and coating weight did not match the data sheet. [NEED_CITE: tensile and tear test methods for coated fabrics per ISO 1421]

PVC coated tarpaulin fabric base fabric denier and coating weight comparison

Denier Selection and Its Direct Impact on Mechanical Performance

The base fabric denier — whether 200DX300D for lighter applications or 1000DX1000D for heavy-duty exposure — governs how the PVC coated tarpaulin fabric responds to tensile and tear forces in the field. A higher denier yarn in the warp and weft provides greater resistance to tear propagation, which matters most at welded seams and eyelet reinforcement points where stress concentrates. Choosing the correct denier is not about picking the heaviest option available; it is about matching the base fabric construction to the actual mechanical demands of the installation.

Coating Weight and Its Relationship to Surface Behaviour

The PVC coating layer serves two functions: it encapsulates the base fabric to provide waterproofing, and it determines how the surface responds to welding, cleaning and environmental exposure. A glossy finish typically indicates a higher coating weight at the surface, which aids heat-seal welding by providing a consistent melt layer. A matte finish reduces glare and can improve ink adhesion for printed branding. The coating method and weight together define the GSM-to-strength relationship, and buyers specifying PVC coated tarpaulin fabric should request the coating weight breakdown separately from the total GSM. [NEED_CITE: coating adhesion and peel strength test standards for PVC coated textiles]

Reading the Specification Sheet Beyond GSM

Four parameters on the material data sheet interact to determine real-world performance. First, base fabric denier and weave density define the tensile and tear baseline before any coating is applied. Second, total GSM combines the base fabric weight with the PVC coating weight, and the ratio between them affects flexibility — a high GSM driven mostly by coating will be stiffer than the same GSM achieved with a heavier base fabric. Third, surface finish (glossy or matte) influences weld behaviour: glossy surfaces tend to seal at lower temperatures, while matte surfaces may require adjusted heat settings to achieve consistent seam strength. Fourth, the temperature range of -15ºC to 70ºC defines the operating envelope; below the lower bound the PVC layer becomes brittle and prone to cracking under flex, while approaching the upper bound the coating softens and may allow the base fabric to shift under load.

PVC coating layer cross-section showing base fabric weave and coating adhesion

The Hidden Cost of Underspecifying Your Fabric Grade

When a technical buyer selects a PVC coated tarpaulin fabric grade based on price alone, the consequences surface weeks or months after installation. A lighter base fabric denier than the application requires leads to tear propagation starting at stress concentration points — corners, eyelets and welded seams. A flame-retardant claim without a documented test report means the material may fail site inspection or regulatory audit, forcing a full replacement at the contractor’s expense. Colour variation between rolls in the same shipment becomes visible once panels are installed side by side on a truck curtain or membrane structure, requiring selective panel sorting or outright rejection. Welded seams that fail before the fabric body typically indicate a mismatch between the welding temperature and the coating composition, a problem that only systematic in-process quality control can prevent. [NEED_CITE: common failure modes in PVC coated fabric installations at flex and weld points]

Why Technical Buyers Source This Material Here

Process control over PVC coating weight and base fabric adhesion has been refined across nearly 30 years of focused production, ensuring that the GSM stated on the quotation is the GSM verified on the roll. Three full production lines and 36 sets of professional equipment provide the capacity to deliver consistent batch quality across multi-roll orders. A 10-person R&D team handles material selection, sample development and custom sizing requests, producing samples within days rather than weeks. Dedicated QA/QC inspection runs at every production stage, with 100% pre-shipment inspection verifying weight, colour consistency and surface finish before any roll leaves the facility. ISO and CE certification underpins the documentation package, giving technical buyers the traceability their procurement systems require.

Documentation & Verification

  • Material specification sheet stating exact GSM, base fabric denier and coating type per roll
  • UV and flame-retardant test reports matched to the specific production batch where applicable
  • ISO and CE certificates included with every shipment alongside certificate of origin
  • Pre-shipment inspection record documenting weight verification and surface quality per roll
  • Roll packing list with gross and net weight for container load planning
  • Customs documentation support for international dispatch

Fabrication, Handling & Storage

  • Heat-seal welding parameters should be adjusted based on whether the glossy or matte surface is being joined
  • Store rolls upright on pallets to prevent flat-spot creasing that affects coating adhesion at the bend
  • Allow cold-stored rolls to acclimatise above 10ºC before unrolling to avoid PVC layer cracking
  • Cutting layout should account for the selected width to minimise off-cut waste and reduce seam count
  • Clean matte surfaces with mild detergent only; solvent-based cleaners can degrade the surface treatment

Specifying the Right Grade for Your Project

Provide the mechanical demands of your application — tensile load at fixing points, expected flex frequency, and exposure conditions — so we can recommend the appropriate base fabric denier and GSM combination. If your market requires a specific flame-retardant or UV certification, state the standard and grade so test documentation can be matched to your production batch. Confirm whether you need roll stock in standard widths or custom sizing, and whether samples are required before bulk production proceeds.

Frequently Asked Questions

Q: How is the stated GSM verified before the PVC coated tarpaulin fabric ships?
A: Every roll undergoes weight verification during the pre-shipment inspection process. The measured GSM is recorded on the material specification sheet that accompanies each shipment, allowing you to confirm the fabric mass matches the quoted grade. If your procurement protocol requires third-party certified weight testing, this can be arranged for your specific batch.

Q: Which base fabric denier should I select for my tensile and tear requirements?
A: The choice depends on the mechanical demands of your application. Lower denier options such as 200DX300D suit lighter covering and temporary protection, while 1000DX1000D provides maximum tear resistance for truck curtains and membrane structures. Share your load and stress data so the appropriate denier can be matched to your performance requirement.

Q: What test documentation supports the UV and flame-retardant claims?
A: Where UV or flame-retardant treatment is specified, test reports are generated for the production batch and included with the shipment documentation. State the specific standard or grade required for your market at the inquiry stage so the correct treatment and corresponding test basis can be confirmed before production begins.

Q: How do glossy and matte finishes affect weld seam behaviour?
A: Glossy surfaces generally provide a more consistent melt layer during heat-seal welding, requiring standard temperature settings. Matte surfaces may need adjusted heat parameters to achieve equivalent seam strength. We recommend running weld tests on sample material to establish the correct temperature and dwell time for your chosen surface finish.

Q: What documentation comes with each roll of PVC coated tarpaulin fabric?
A: Each shipment includes a material specification sheet with GSM and denier data, relevant test reports for UV and flame-retardant grades, ISO and CE certificates, a pre-shipment inspection record, a roll packing list and certificate of origin. Additional customs documentation is provided based on your destination country requirements.

Accepting Inquiries

Get a Custom Quote for
PVC Coated Woven Tarpaulin Fabric Technical Grade

Fill in your requirements and our sales team will respond within 24 hours with a detailed quotation. We support sample orders, bulk production, and OEM/ODM customization.

01
Submit Inquiry
Describe your needs and quantity
02
Sample Confirmation
We prepare samples for your approval
03
Quotation & Order
Formal quote, contract and payment
04
Production & Ship
Full QC inspection before delivery

Product Inquiry Form

Sending...

By submitting this form, you agree to be contacted by our sales team. We respect your privacy and will never share your information.

Related Products

You May Also Like

PVC Coated Tarpaulin Knife Coated Grade
PVC Coated Fabric

PVC Coated Tarpaulin Knife Coated Grade

<p><strong>PVC Coated Tarpaulin</strong> with polyester base fabric, 350gsm–900gsm weight range, and double-sided PVC coating for versatile industrial use.</p> <ul> <li>Coating weight and base fabric denier jointly determine tensile and tear performance — higher GSM alone does not guarantee strength</li> <li>Knife coated process ensures strong adhesion and reliable heat-sealed seams at flex points</li> <li>UV and flame retardant treatments available with supporting test reports</li> </ul> <p>Nearly 30 years of coated fabric expertise with dedicated QA at every production stage and 100% pre-shipment inspection.</p>

View Details
Industrial Grade PVC Coated Fabric Roll for Truck – Laminated
PVC Coated Fabric

Industrial Grade PVC Coated Fabric Roll for Truck – Laminated

<p><strong>PVC Coated Fabric Roll, 400-1500 g/m², 500D-2000D Polyester Base</strong> — available in medium, heavy-duty, and super heavy grades with lamination or hot melt coating technology for superior welding tear strength.</p> <p>Base fabric denier and coating method jointly determine tensile performance and seam durability. Hot melt coating delivers stronger peel resistance at welded joints, critical for truck tarpaulins and tensioned structures where flex fatigue concentrates at seams.</p> <ul> <li>Thickness: 0.35-1.5mm across weight grades</li> <li>Tensile strength up to 3000 N/5cm warp</li> <li>Flame retardant, anti-static, and cold prevention treatments available</li> </ul> <p>Backed by 30 years of coating process control, 100% pre-shipment inspection, and dedicated QA at every production stage.</p>

View Details
Fire Retardant PVC Coated Fabric for Warehouse Cover – Laminated Grade
PVC Coated Fabric

Fire Retardant PVC Coated Fabric for Warehouse Cover – Laminated Grade

<p><strong>Fire Retardant PVC Coated Tarpaulin, 400-1500 g/m², 500D-2000D Base</strong> — laminated and hot melt coated with B1 fire retardant certification, available in thickness from 0.35 mm to 1.5 mm for warehouse covers and construction enclosures.</p> <p>Base fabric denier and coating method directly govern tensile strength and weld performance; 1000D polyester delivers meridian tension up to 2500 N/5cm, while hot melt lamination ensures consistent seam adhesion during heat welding. GSM alone does not determine durability — knitting density and coating weight together define tear resistance and long-term field behaviour.</p> <ul> <li>Tensile strength up to 3000 N/5cm warp with 100% pre-shipment GSM inspection</li> <li>B1 fire retardant test report supplied with each batch</li> <li>Custom width, colour and roll length with rapid sample turnaround</li> </ul>

View Details
Waterproof Fire Retardant PVC Coated Polyester Fabric – Technical Grade
PVC Coated Fabric

Waterproof Fire Retardant PVC Coated Polyester Fabric – Technical Grade

<p><strong>Waterproof Fire Retardant PVC Coated Polyester Fabric</strong> — 500D×500D base, 450–900 g/m², double-sided PVC coating with flame retardant and anti-UV treatment.</p> <ul> <li>Coating weight and base fabric denier together determine tensile and tear performance; controlled GSM ensures roll-to-roll consistency across your order.</li> <li>Hot air weldable for field repair and custom fabrication on truck covers, awnings and site enclosures.</li> <li>Supplied with UV and flame retardant test reports, ISO and CE documentation, and 100% pre-shipment inspection on every roll.</li> </ul>

View Details

Ready to Place a Bulk Order or Need a Sample?

Factory-direct pricing · Full QC inspection · 20+ countries shipped · OEM/ODM supported