Anti-Static Printable PVC Coated Tarpaulin for Exhibition Booth – Technical Grade
Anti-Static Printable PVC Coated Tarpaulin for Exhibition Booth – Technical Grade
ISO 9001 ISO 14001 ISO 45001 CE

Anti-Static Printable PVC Coated Tarpaulin for Exhibition Booth – Technical Grade

<p><strong>Anti-Static Printable PVC Coated Tarpaulin</strong> — 400-1500 g/m², 500D-2000D base fabric, lamination and hot melt coated for exhibition booth and event backdrop use.</p> <ul> <li>Base yarn denier and knitting density drive tensile and tear strength; GSM alone does not define fabric performance</li> <li>Coating method selection affects adhesion, flexibility and weld seam integrity under tension</li> <li>Cold crack resistant to -30°C with anti-static and flame retardant treatment applied</li> <li>Available in 0.35-1.5 mm thickness for medium to super-heavy duty structural covers</li> </ul> <p>Backed by nearly 30 years of coated fabric process control, 100% pre-shipment inspection, and a 10-person R&D team handling material selection and sample development.</p>

Quality
Certified
OEM/ODM
Support
20+ Countries
Exported
+86 137 9310 1270 Reply within 24h

Material integrity verified at every stage — Each roll undergoes strict in-process QA covering coating adhesion, weight consistency, and surface resistivity before leaving the production line.

Technical Specifications

Parameter Value
Product Type PVC Coated Tarpaulin
Material Base 100% high toughness polyester yarn
Coating Technology Lamination and hot melt coating
Weight Range 400-1500 GSM (confirm specific grade)
Thickness 0.35-1.5 mm
Base Fabric Denier 500D-2000D
Tensile Strength (Warp) 1500-3000 N/5cm (grade dependent)
Tensile Strength (Weft) 1200-2800 N/5cm (grade dependent)
Cold Crack Resistance -30°C
Key Features Waterproof, mold proof, printable surface, anti-static treatment applied, flame retardant treatment available (grade not stated)

Application Suitability

Application Exposure & Requirement
Exhibition booth and event backdrop Indoor or semi-outdoor lighting rigs, high foot traffic, requires printable and anti-static surface for graphic clarity and dust rejection
Tensioned membrane and inflatable structures Permanent wind load, structural stress at attachment points, demands high denier base and strong coating adhesion for weld integrity
Industrial pipe canopy and engineering covers Constant UV exposure, moisture contact, requires waterproof and mold-proof coating with long-term weather resistance

Why Coating Weight Alone Fails to Predict Performance

Specifying a PVC coated tarpaulin by GSM alone often leads to material failure because thickness and weight do not confirm the bond between the polyester base and the PVC layer.

Buyers frequently find that a heavier fabric fails at the heat-welded seam long before the main panel tears. This happens when the coating adhesion is weak or the base fabric denier is insufficient for the mechanical load. [NEED_CITE: coating adhesion test methods per ISO 2411] When the material flexes under tension, a poorly bonded coating delaminates, leaving the structural yarns exposed to abrasion and moisture. This is particularly critical for tensioned structures and heavy-duty transport covers where the seams carry the highest stress.

Close-up of PVC coated polyester weave structure showing lamination layer

The Role of Base Fabric Density in Tensile Behaviour

The tensile strength of this PVC coated tarpaulin is driven by the interplay between the polyester yarn denier and the knitting density. A 1000D yarn in a tight weave provides a higher baseline for warp and weft strength than a lighter denier in a loose construction. The hot melt coating technology penetrates the weave, locking the yarns in place and preventing them from shifting under point loads. This is essential when the fabric is used for exhibition structures or industrial canopies where localised stress occurs at fixing points.

Coating Methods and Their Effect on Weld Integrity

Lamination and hot melt technologies offer different outcomes for fabrication. Hot melt coating typically forces the PVC compound into the interstices of the polyester weave, creating a mechanical bond that improves peel strength. [NEED_CITE: peel strength requirements for heat-welded coated fabrics] Lamination technology bonds pre-formed PVC films to the base, which can yield a smoother surface suitable for high-resolution printing. For applications requiring extensive heat welding, the coating method directly influences the temperature window and dwell time needed to achieve a seam that matches the parent material strength.

Decoding the Specification Sheet

GSM and thickness provide a starting point, but the denier of the base fabric (500D to 2000D) determines how the material resists tear propagation. A high-GSM fabric with a low-denier base may puncture easily, while a lower-GSM fabric with a high-denier base offers better tear resistance. The stated cold crack resistance of -30°C defines the lower operational boundary; below this, the PVC matrix becomes brittle and may fracture under impact or folding. The anti-static treatment is applied during the coating process, which is critical for exhibition environments where dust attraction ruins graphic displays. However, buyers must confirm the specific surface resistivity standard required by their venue or local safety code, as treatment levels vary. [NEED_CITE: electrostatic discharge standards for indoor exhibition materials] The weather resistance is stated for extended outdoor exposure, but the actual service life depends on installation tension, UV intensity, and maintenance frequency.

Diagram showing PVC coating layers over polyester base fabric

The Hidden Cost of Incorrect Grade Selection

Selecting a medium-grade fabric for a heavy-duty structural application often results in premature failure at the seams or fixing points. If the anti-static treatment is not verified by a test report, the fabric may attract dust and debris, compromising the visual quality of a printed exhibition backdrop. Conversely, specifying a super-heavy grade for a temporary event structure adds unnecessary weight, increasing transport costs and making on-site handling difficult. Mismatches between the stated flame retardant treatment and local fire codes can lead to failed safety inspections and project delays.

Process Control That Supports Your Specification

Our production lines maintain strict control over coating weight and adhesion, verified through in-process testing. The R&D team develops custom formulations, including specific anti-static and printable grades, to meet exact application needs. A dedicated QA/QC protocol checks every roll for weight consistency, coating bond strength, and surface quality before it is packed. Samples are developed quickly to confirm that the material meets your fabrication and performance requirements before bulk production begins. This approach minimizes the risk of receiving fabric that deviates from the agreed specification.

Documentation & Verification

  • Material spec sheet detailing exact GSM, denier, and coating technology for the ordered grade.
  • Test report for anti-static surface resistivity upon request.
  • Pre-shipment inspection record showing measured coating weight and adhesion values.
  • Roll packing list with individual roll weights and dimensions.
  • Certificate of origin and customs documentation for export shipments.

Fabrication, Handling & Storage

  • Use heat welding parameters matched to the specific coating technology and GSM grade.
  • Store rolls horizontally in a cool, dry place to prevent permanent creasing or coating deformation.
  • Allow cold rolls to acclimatise to room temperature before unrolling to avoid cracking the PVC layer.
  • Clean printed surfaces with mild, non-abrasive detergents to preserve the anti-static treatment.
  • Plan cutting layouts to minimise waste, accounting for the specific roll width of the selected grade.

Requesting the Right Material for Your Project

To specify the correct grade, please provide details of the end application, including expected mechanical loads and environmental exposure. Specify any mandatory fire safety or anti-static standards required by your local venue or building code. Confirm the required roll width, colour, and whether you need the material supplied in roll form or pre-cut to specific dimensions. This information allows us to recommend the precise formulation and provide a material sample for your approval.

Frequently Asked Questions

Q: How is the GSM verified before shipment and what tolerance applies?
A: Every roll is weighed and measured during our pre-shipment inspection. We verify that the actual weight aligns with the quoted GSM for the specific grade ordered. The inspection record, included with your shipping documentation, provides the measured values, giving you confidence that the material matches the specification.

Q: What test standard confirms the anti-static treatment on this fabric?
A: The anti-static treatment is applied to reduce surface resistivity, which is essential for exhibition and event applications where dust attraction is a concern. We can provide a test report detailing the surface resistivity upon request. Please specify the standard required by your venue or local safety authority so we can ensure compliance.

Q: Which coating method provides better results for heat-welded seams?
A: Both lamination and hot melt technologies can produce strong welds, but hot melt coating often yields higher peel strength because the PVC penetrates the polyester weave. The optimal welding temperature and speed depend on the specific GSM and coating formulation. We recommend requesting a sample to test your fabrication equipment settings.

Q: Can flame retardant and anti-static treatments be combined?
A: Yes, it is possible to combine flame retardant and anti-static treatments on the same PVC coated tarpaulin. However, adding multiple treatments can influence the surface finish and flexibility. Please confirm the specific fire classification and anti-static standard you require so we can formulate the material to meet both demands.

Accepting Inquiries

Get a Custom Quote for
Anti-Static Printable PVC Coated Tarpaulin for Exhibition Booth – Technical Grade

Fill in your requirements and our sales team will respond within 24 hours with a detailed quotation. We support sample orders, bulk production, and OEM/ODM customization.

01
Submit Inquiry
Describe your needs and quantity
02
Sample Confirmation
We prepare samples for your approval
03
Quotation & Order
Formal quote, contract and payment
04
Production & Ship
Full QC inspection before delivery

Product Inquiry Form

Sending...

By submitting this form, you agree to be contacted by our sales team. We respect your privacy and will never share your information.

Related Products

You May Also Like

PVC Coated Tarpaulin with Waterproof Feature – Knife Coated
PVC Coated Fabric

PVC Coated Tarpaulin with Waterproof Feature – Knife Coated

<p><strong>PVC Coated Tarpaulin 450-900 g/m², 500D-500D Base, Waterproof & Anti-UV</strong> — knife coated on both sides for truck, trailer and industrial covers.</p> <ul> <li> <p>Coating weight and base fabric denier jointly determine tensile and tear strength; our process controls GSM precisely across every roll.</p> </li> <li> <p>Anti-UV and flame-retardant treatments available with test reports backing each claim.</p> </li> <li> <p>Backed by nearly 30 years of coated fabric expertise, 100% pre-shipment inspection and dedicated QA at every production stage.</p> </li> </ul>

View Details
PVC Coated Tarpaulin Fabric 1000d | Technical Grade
PVC Coated Fabric

PVC Coated Tarpaulin Fabric 1000d | Technical Grade

<p><strong>PVC Coated Tarpaulin Fabric, 350gsm–900gsm, 1000D×1000D Base, Double-Sided PVC Coating</strong> — engineered for demanding transport and construction environments where seam integrity and dimensional stability matter most.</p> <p>Base fabric denier and weave density work together with coating weight to define tensile and tear performance. Higher GSM does not always mean better — matching yarn count to actual load flex determines whether the fabric or the weld fails first. Heat-sealed seamless edge wrapping and reinforced eyelets address stress-point breakdown common in generic tarpaulin.</p> <p>Backed by a 10-person R&D team handling material selection and sample development, with 100% pre-shipment inspection and full test documentation for UV and fire retardant grades.</p>

View Details
PVC Coated Fabric for Truck Tent Outdoor – Laminated Grade
PVC Coated Fabric

PVC Coated Fabric for Truck Tent Outdoor – Laminated Grade

<p><strong>PVC Coated Tarpaulin Roll Cover</strong>, 50gr/m²~220gr/m², 0.2-0.4mm Thickness, HDPE Base with LDPE Lamination — engineered for truck, tent, and outdoor protection applications.</p> <ul> <li>Coating weight and base fabric density together determine tensile and tear performance; match GSM to actual load and exposure conditions, not just a higher number.</li> <li>Double-side lamination delivers consistent waterproof barrier, while UV treatment and anti-aging formulation extend service life under sun exposure.</li> <li>Custom widths, colors, and reinforced finishing options available to reduce waste and seam count in fabrication.</li> </ul> <p>Verified GSM on every roll before shipment — 30 years of coating process control ensures delivered weight matches the spec sheet, backed by 100% pre-shipment inspection.</p>

View Details
PVC Coated Fabric 500gsm 600gsm | Knife Coated Grade
PVC Coated Fabric

PVC Coated Fabric 500gsm 600gsm | Knife Coated Grade

<p><strong>PVC Coated Tarpaulin</strong> with 500gsm–900gsm weight range, flame retardant and anti-UV surface treatment, waterproof high-strength construction for truck cargo covers and outdoor equipment protection.</p> <ul> <li>Base fabric denier and weave determine tensile performance under load flex, while coating weight distribution governs weld integrity at stress concentration points</li> <li>Knife coated process ensures consistent adhesion between coating and base fabric across every roll</li> </ul> <p>100% pre-shipment inspection with weight sampling verifies GSM matches your specification sheet before dispatch.</p>

View Details

Ready to Place a Bulk Order or Need a Sample?

Factory-direct pricing · Full QC inspection · 20+ countries shipped · OEM/ODM supported