PVC Coated Fabric 500gsm 600gsm | Technical Grade
PVC Coated Fabric 500gsm 600gsm | Technical Grade
ISO 9001 ISO 14001 ISO 45001 CE

PVC Coated Fabric 500gsm 600gsm | Technical Grade

<p><strong>Fireproof PVC Tarpaulin Truck Cargo Cover</strong> — 500gsm / 600gsm PVC coated tarpaulin with flame retardant, anti-static, anti-cold, and anti-mildew treatment options.</p> <ul> <li>Coating weight and base fabric selection jointly determine tensile and tear behaviour; choose the grade that matches your load stress, not just the heaviest option.</li> <li>Custom width, length, eyelets, and reinforced hems available for precise trailer fitment.</li> <li>Welded seam integrity depends on coating method and adhesion control across the full production run.</li> </ul> <p>Backed by 30 years of coating process control, in-process QA at every stage, and 100% pre-shipment inspection on every roll.</p>

Quality
Certified
OEM/ODM
Support
20+ Countries
Exported
+86 137 9310 1270 Reply within 24h

Coating Process Control — Every roll of PVC coated tarpaulin leaving our Jinan facility is checked for adhesion, coating weight, and surface finish before dispatch, keeping GSM and fire-retardant behaviour consistent across bulk orders.

Technical Specifications

Parameter Value
Product Type PVC Coated Tarpaulin
Weight Options 500gsm / 600gsm
Coating Material PVC
Flame Retardant Fireproof treatment available (grade to be confirmed for target market)
Waterproof Construction Yes
Special Treatments Available Flame retardant; anti-static; anti-cold; anti-mildew
Weather Resistance 1–3 years outdoor service life stated
High Strength Stated to reduce installation damage
Finishing Options Custom width, length, eyelets and reinforced hems available on request

Application Suitability

Application Exposure & Requirement
Truck and trailer cargo covers Constant flexing at tie-down points, road spray, UV and abrasion at seams
Outdoor equipment and site covers Sun exposure, rain ingress, wind-driven debris, occasional pooling water
Tent and awning fabrication by roll Colour consistency across panels, weld-ability at long seams, fire classification for public venues
Agricultural and aquaculture pond liners Continuous water contact, soil chemistry, puncture risk from substrate

Why the Stated GSM Is Not the Whole Story for PVC Coated Tarpaulin

Coating weight only performs as well as the base fabric and adhesion method behind it.

Technical buyers frequently quote a 500gsm or 600gsm figure and assume tensile and tear values will follow. In practice, two rolls with identical GSM can behave very differently once fabricated into truck side curtains or site enclosures. The discrepancy usually traces back to base fabric denier, weave density, or coating adhesion — none of which a GSM reading captures. [NEED_CITE: tensile and tear test methods for coated fabrics per ISO 1421]

When the weld line fails before the fabric itself, the root cause is rarely the topcoat weight. It is the bond between the PVC layer and the polyester scrim, or a mismatch in hot-air welding temperature. Specifying PVC coated tarpaulin 500gsm 600gsm without a supporting material data sheet leaves these variables uncontrolled.

Base Fabric and Coating Adhesion

PVC coated tarpaulin 500gsm 600gsm grades rely on a polyester scrim sandwiched between two PVC films applied by knife coating or calendering. Knife coating pushes paste into the weave, giving higher peel strength at the cost of a slightly heavier hand feel. Calendering presses pre-formed film onto the scrim, yielding a smoother surface preferred for printed branding and tight colour matching across rolls. The choice directly affects how the material behaves at hot-air welded seams, which is where most field failures originate.

Flame Retardant Chemistry and Market Compliance

Fireproof treatment for PVC coated tarpaulin is achieved by blending halogenated or phosphorus-based additives into the plastisol before coating. The resulting classification — M2, B1, NFPA 701, or DIN 4102 — determines which jurisdictions accept the fabric for public venues and transport covers. [NEED_CITE: DIN 4102 fire classification for building materials] Requesting the specific grade required for your market at the enquiry stage ensures the correct additive package is used and the accompanying test report cites the right standard, rather than a generic self-extinguishing claim that will not satisfy a local fire inspector.

Reading the Specification Sheet Correctly

GSM measures total mass per square metre, but tensile strength depends on yarn denier and ends-per-centimetre in warp and weft. A 500gsm fabric woven from 1000-denier yarn at a tighter weave will resist tearing longer than a 600gsm fabric using lower-denier yarn with extra coating filler. Tear propagation — the force needed to extend an existing slit — is governed more by weave density and yarn crimp than by topcoat thickness. Surface finish also matters: glossy PVC sheds dirt and water more readily, while matte finishes reduce glare on reflective signage and accept solvent-based inks more cleanly. Anti-cold additives keep the PVC flexible at sub-zero temperatures, whereas anti-mildew packages protect stored rolls and installed covers in humid climates. Anti-static treatments lower surface resistivity, a requirement for ducting in mining and grain-handling environments. [NEED_CITE: surface resistivity testing for anti-static PVC coated fabrics]

PVC coated tarpaulin cross-section showing polyester scrim and coating layers

The Cost of Overlooking Fabric Construction

A roll that passes GSM inspection yet uses a loose weave will stretch under tie-down tension, causing eyelets to pull through within weeks. Flame retardant additives added at the wrong ratio may pass a small-sample lab test but fail a full-panel burn test conducted by the end-user’s safety officer. Batch-to-batch colour drift, often invisible on a single roll, becomes obvious once three panels are seamed side by side on a trailer curtain. [NEED_CITE: colour consistency standards for PVC coated fabric in transport covers] These issues are preventable when the material specification sheet is treated as the primary contract document rather than a marketing handout.

Sourcing PVC Coated Tarpaulin With Verified Process Control

Three full production lines and 36 sets of professional equipment allow batch consistency across container-load orders without splitting production between subcontractors.

A dedicated 10-person R&D team develops custom treatment formulations — anti-cold, anti-mildew, or specific fire grades — and ships confirmation samples within days rather than weeks.

Every roll undergoes in-process QA during coating and a 100% pre-shipment inspection covering weight, colour, and adhesion before packing.

ISO and CE certification at company level supports customs clearance and end-market compliance documentation for exports to North America, Europe, and Asia.

Sample development covers custom width, colour matching, and treatment verification, letting fabricators approve the exact material before committing to full roll stock.

Documentation & Verification

  • Material specification sheet stating exact GSM, base fabric denier, weave, and coating method per roll
  • Flame retardant test report citing the applicable grade required for the destination market
  • Pre-shipment inspection record confirming coating weight and colour consistency roll by roll
  • ISO and CE certificates provided with shipping documentation for customs and compliance files
  • Roll packing list detailing net weight, linear metres, and batch reference for traceability
  • Certificate of origin issued for preferential tariff treatment where applicable

Fabrication, Handling & Storage

  • Hot-air weld temperature must match the specific PVC formulation used on 500gsm or 600gsm rolls to avoid delamination
  • Reinforced hems and eyelets should be placed at intervals matching the tarpaulin weight grade and expected tie-down load
  • Store rolls upright on pallets to prevent flat-spot creases that become permanent after weeks in the warehouse
  • Allow cold-stored rolls to reach ambient temperature before unrolling to avoid coating micro-cracking at the surface
  • Use mild, non-solvent cleaners on glossy PVC surfaces to preserve coating integrity and colour depth over time
  • Plan panel layout to minimise transverse seams, which concentrate flex fatigue on truck curtain applications

Specifying the Right Grade for Your Project

Provide the exposure conditions — UV load, temperature range, and fire classification — along with target width and annual volume so the correct 500gsm or 600gsm formulation is selected. If you require a specific flame retardant grade for your market, state the standard at the enquiry stage so the test report is prepared in parallel with sample development.

Frequently Asked Questions

Q: How is the actual GSM of PVC coated tarpaulin verified on arrival?
A: Each roll is weighed and measured during pre-shipment inspection, and a roll-by-roll weight record accompanies the shipment. On receipt, buyers can cross-check by cutting a known area, weighing it, and comparing against the stated 500gsm or 600gsm figure. Discrepancies beyond normal tolerance should be flagged before fabrication begins.

Q: Which flame retardant grade applies to my market for this fabric?
A: Common classifications include M2 for France, B1 per DIN 4102 for Germany, and NFPA 701 for the United States. The correct grade depends on the end-use and local building or transport codes. Specify the required standard at enquiry so the matching additive package and test report are prepared.

Q: How does the PVC coating method affect weld strength on fabricated products?
A: Knife-coated PVC penetrates the polyester scrim, producing higher peel strength at hot-air welded seams compared with calendered film. For truck curtain and duct fabrication where long seams carry structural load, knife-coated 500gsm or 600gsm grades typically give more reliable joint integrity after extended flexing.

Q: How are anti-static values measured for industrial PVC coated fabric?
A: Surface resistivity is measured in ohms per square using standardised electrode methods. The acceptable range depends on the application — mining ventilation ducts, for example, require a lower resistivity than general warehouse covers. Request the test method and target value relevant to your industry when specifying anti-static treatment.

Q: Can I obtain samples before committing to a bulk roll order?
A: Yes. Samples are developed within days for custom width, colour, and treatment formulation. Fabricators are encouraged to test weld parameters and verify colour consistency against existing panels before approving the bulk production run.

Accepting Inquiries

Get a Custom Quote for
PVC Coated Fabric 500gsm 600gsm | Technical Grade

Fill in your requirements and our sales team will respond within 24 hours with a detailed quotation. We support sample orders, bulk production, and OEM/ODM customization.

01
Submit Inquiry
Describe your needs and quantity
02
Sample Confirmation
We prepare samples for your approval
03
Quotation & Order
Formal quote, contract and payment
04
Production & Ship
Full QC inspection before delivery

Product Inquiry Form

Sending...

By submitting this form, you agree to be contacted by our sales team. We respect your privacy and will never share your information.

Related Products

You May Also Like

PVC Coated Tarpaulin 500gsm 600gsm | Technical Grade
PVC Coated Fabric

PVC Coated Tarpaulin 500gsm 600gsm | Technical Grade

<p><strong>PVC Coated Tarpaulin</strong> — 500gsm / 600gsm weight options, waterproof surface treatment, with flame retardant, anti-static, anti-cold and anti-mildew treatments available for demanding environments.</p> <ul> <li>Coating weight and base fabric adhesion are process-controlled to maintain consistent GSM roll-to-roll, ensuring tensile and tear performance matches specification at the flex points where loads shift most.</li> <li>Backed by dedicated QA/QC at every production stage, 100% pre-shipment inspection with roll-by-roll verification, and full material documentation including test reports where treatments are specified.</li> </ul>

View Details
Knife Coated PVC Coated Tarpaulin Fabric – Technical Grade
PVC Coated Fabric

Knife Coated PVC Coated Tarpaulin Fabric – Technical Grade

<p><strong>Knife Coated PVC Coated Tarpaulin</strong> — roll stock with flame retardant, anti-static, anti-UV, and waterproof treatments for truck covers, tents, and industrial outdoor protection.</p> <ul> <li>Knife coated construction delivers higher tensile and tear strength than laminated alternatives, with superior coating adhesion at heat-welded seams</li> <li>Base fabric denier and coating weight jointly determine performance — our 10-person R&D team develops custom width, length, colour, and GSM to match your fabrication requirements</li> <li>Roll-to-roll GSM consistency verified through dedicated QA/QC at every production stage, with 100% pre-shipment inspection and full documentation including material spec sheets and test reports on request</li> </ul>

View Details

Ready to Place a Bulk Order or Need a Sample?

Factory-direct pricing · Full QC inspection · 20+ countries shipped · OEM/ODM supported