PVC Coated Fabric Technical Grade – Knife Coated
PVC Coated Fabric Technical Grade – Knife Coated
ISO 9001 ISO 14001 ISO 45001 CE

PVC Coated Fabric Technical Grade – Knife Coated

<p><strong>Waterproof Heavy Duty PVC Coated Tarpaulin</strong> — double-sided PVC coating on polyester base fabric, 350gsm–900gsm range, high-frequency hot melt welding for seam integrity.</p> <ul> <li>Base fabric denier and weave (500D to 2000D) directly determine tensile and tear behaviour; coating weight controls abrasion resistance, not just GSM alone.</li> <li>Knife-coated construction ensures strong PVC-to-yarn adhesion, critical where flexing loads stress welded seams.</li> <li>10-person R&D team handles material selection and custom sizing with 100% pre-shipment inspection across all three production lines.</li> </ul>

Quality
Certified
OEM/ODM
Support
20+ Countries
Exported
+86 137 9310 1270 Reply within 24h

Deep process control over coating weight — Every roll of PVC coated tarpaulin material is verified against its stated GSM, base fabric denier, and coating adhesion before it leaves the production line.

Technical Specifications

Parameter Value
Product Type PVC Coated Tarpaulin Roll
Weight (GSM) 350, 400, 420, 500, 600, 650, 750, 900
Base Fabric Denier 500D×840D, 500D×1000D, 1000D×1000D, 1000D×1300D, 1300D×1300D, 1000D×2000D
Mesh Count 30×19, 20×20, 30×15
Coating Material PVC (knife coated)
Total Thickness 0.29mm (350 GSM) to 0.65mm (900 GSM)
Width 2m, 2.1m (varies by grade)
Tensile Strength Warp 1650 N to 3900 N (varies by grade, test standard not stated)
Tensile Strength Weft 1600 N to 3500 N (varies by grade, test standard not stated)
Flame Retardant Available in flame retardant grades — confirm the grade required for your market
UV Treatment Claimed — test basis not stated, request test report
Anti-Mildew Claimed
Finish Glossy or matte finish available
Welding Options High frequency hot melt, hot air welding, sewing
Printing Printable, customised
Eyelet & Hem Options 3cm aluminium alloy eyelet, reinforced corners, 5mm rope hem, heat-sealed edge wrapping
Colour Customisable
Certification ISO, CE

Application Suitability

Application Exposure & Requirement
Truck side curtain Constant flexing at load points, road spray abrasion, UV exposure, tensile demand at tie-down zones
Trailer top cover Standing water, wind uplift stress, thermal cycling across seasons
Outdoor event tent (block-out) Full sun exposure, repeated assembly and disassembly, light blocking requirement
Awning and canopy Permanent UV exposure, wind load on seams, surface dirt accumulation
Inflatable structure Internal air pressure load, seam integrity under continuous stress, puncture risk during transport
Construction membrane Wind-driven rain, chemical contact from fresh concrete, puncture from site debris
Pond and reservoir liner Permanent water immersion, UV exposure at waterline, soil chemistry contact

Why GSM Alone Does Not Define PVC Coated Tarpaulin Material Properties and Tensile Strength

Tensile performance is a product of base fabric denier, weave density, and coating weight — not GSM by itself.

A buyer who specifies material only by grams per square metre is missing the structural input that actually resists tearing and flex fatigue. Two rolls can carry the same GSM yet differ substantially in tensile capacity because one uses a higher-denier yarn with fewer ends per inch, while the other packs lighter yarns more densely. The PVC coating adds weight but contributes little to load-bearing once the base fabric yields. Technical buyers who have reviewed field failures consistently find that seam and fabric failures correlate with denier specification gaps rather than GSM shortfalls [NEED_CITE: relationship between base fabric denier and tensile performance in coated fabrics per ISO 1421].

![](PVC coated tarpaulin material showing base fabric weave and double-sided coating layers)

Base Fabric Denier as the Structural Backbone

The denier of the polyester base yarn — ranging from 500D×840D up to 1000D×2000D across the available grades — determines how much load the PVC coated tarpaulin can carry before the fabric itself deforms. A 1000D×2000D base at 900 GSM delivers warp tensile values reaching 3900 N, while a 500D×840D base at 350 GSM sits around 1650 N. The specification choice here must match the peak stress the finished product will face in service, not simply the weight tolerance stated on a purchase order.

Coating Weight, Adhesion and Seam Behaviour

The knife-coated PVC layer contributes waterproofing, surface durability, and weld receptivity — but its bond to the base fabric governs whether a welded seam holds or delaminates under flex. Coating weight increases through the 350 to 900 GSM range correlate with thicker total profiles from 0.29mm to 0.65mm. Heavier grades absorb more heat during high-frequency welding, requiring adjusted dwell times to achieve full adhesion without scorching. Hot air welding on lighter grades demands tighter temperature control to avoid base fabric damage [NEED_CITE: high-frequency versus hot-air welding parameters for PVC coated polyester fabrics].

Reading the GSM-to-Denier Mapping for Specification Accuracy

GSM Grade Representative Denier Typical Use Profile
350–420 500D×840D / 500D×1000D Light covers, temporary shelters, indoor barriers
500–600 1000D×1000D / 1000D×1300D Truck side curtains, awnings, event tents
650–750 1000D×1300D / 1300D×1300D Trailer tops, membrane structures, heavy-duty covers
900 1000D×2000D Inflatable structures, high-tension membrane applications

Selecting the correct PVC coated tarpaulin material properties depends on matching the tensile strength requirement of the application to both the GSM and the denier, not to GSM alone. A membrane structure under continuous wind load demands high warp tensile values that only a heavy denier base can deliver, regardless of how much coating weight sits on top.

![](Cross-section view of knife-coated PVC layer bonded to woven polyester base fabric)

The Hidden Cost of Specifying Weight Without Denier

When a fabricator sources material by GSM without confirming the underlying denier, the finished product can pass initial inspection yet fail prematurely at the points where load concentrates. Welded seams on undersized base fabrics show delamination before the coating surface shows wear. Tensile test results on arrival may meet the GSM-based expectation while the tear propagation resistance falls short because the yarn count is lighter than assumed [NEED_CITE: coated fabric tear propagation test methods and base fabric correlation]. This mismatch is rarely caught at goods-in inspection because standard receiving checks measure weight per square metre, not denier under a microscope.

Why Material and Coating Data Belongs on the Purchase Order

Deep process control across coating weight and base fabric selection — Three full production lines and dedicated QA at each stage mean the denier, mesh count, and coating adhesion are confirmed per roll, not assumed from a product family range.

The 10-person R&D team develops samples within days when a technical buyer needs to confirm weld behaviour or tensile performance on a specific GSM grade before committing to production volume. Pre-shipment inspection records verify that the roll weight matches the quoted GSM and that the base fabric denier matches the specification sheet, closing the gap between what was ordered and what arrives. ISO and CE certification frameworks govern the documentation trail, and test reports for flame retardant and UV treatments are available where the grade has been confirmed against the buyer’s market requirement.

Documentation & Verification

  • Material specification sheet stating exact GSM, base fabric denier, mesh count, and coating type per roll
  • Test report for flame retardant grade — confirm the classification standard required in your market
  • UV treatment test basis documented when anti-UV grades are specified for outdoor service
  • Pre-shipment inspection record verifying GSM and base fabric denier against purchase order
  • ISO and CE certificates supplied with the shipment documentation package
  • Roll packing list with batch reference for colour consistency traceability

Fabrication, Handling & Storage

  • High-frequency welding on 650–900 GSM grades requires extended dwell time to achieve full PVC fusion at the seam
  • Hot air welding on 350–420 GSM grades demands lower temperature settings to protect the lighter base fabric denier
  • Store rolls upright on core to prevent flat-spot creases that weaken the coating bond at fold lines
  • Heat-sealed edge wrapping and reinforced corners must be specified at order to match the finished panel dimensions
  • Surface cleaning with mild detergent preserves the PVC coating without degrading flame retardant or anti-mildew treatments
  • Aluminium alloy eyelets at 3cm diameter distribute tie-down load across the base fabric weave without pull-through

What to Provide When Requesting a Quotation

Share the application and the peak mechanical stress the fabric will face — whether that is wind uplift on a membrane, flex cycling on a side curtain, or internal pressure on an inflatable. State the GSM grade or the tensile strength requirement you have calculated, along with the width and roll length needed for your fabrication layout. If your market requires a specific flame retardant classification or UV test standard, name it explicitly so the correct treatment grade is confirmed before production begins.

Frequently Asked Questions

Q: How can I verify the GSM of the PVC coated tarpaulin on arrival matches my order?
A: Cut a measured sample from the roll and weigh it against the stated GSM on your material specification sheet. The pre-shipment inspection record supplied with your order documents the per-roll verification performed before dispatch. If the result falls outside tolerance, the batch reference on the packing list enables traceability back to the production run for resolution.

Q: Which flame retardant grade applies to my market, and can it be tested?
A: Flame retardant classifications vary by region — M2 for France, B1 per DIN 4102 for Germany, NFPA 701 for the United States. Confirm the grade required by your local regulation or project specification. Once confirmed, a test report for the applicable standard can be supplied with the shipment documentation.

Q: How do I choose between high-frequency and hot air welding for my GSM grade?
A: Heavier grades from 650 to 900 GSM respond well to high-frequency hot melt welding, which produces consistent seam integrity through full-thickness PVC fusion. Lighter grades from 350 to 420 GSM are better suited to hot air welding with controlled temperature to avoid base fabric damage. Sample welds are available to confirm the correct method before bulk fabrication.

Q: Will colour be consistent across all rolls in my order?
A: Batch colour consistency is verified during pre-shipment inspection. Rolls produced in the same run are matched against the confirmed colour reference. The packing list carries the batch reference so you can trace each roll. If you require side-by-side visual confirmation before dispatch, request a pre-shipment photo set showing multiple rolls unrolled together.

Q: What test basis supports the anti-UV claim on this fabric?
A: Anti-UV treatment is applied during the coating process, but the specific test basis and exposure rating vary by grade. Request the UV test report for your selected GSM grade to confirm the treatment level matches your expected outdoor service conditions. This documentation is available for grades where UV stabilisation has been specified at the time of order.

Accepting Inquiries

Get a Custom Quote for
PVC Coated Fabric Technical Grade – Knife Coated

Fill in your requirements and our sales team will respond within 24 hours with a detailed quotation. We support sample orders, bulk production, and OEM/ODM customization.

01
Submit Inquiry
Describe your needs and quantity
02
Sample Confirmation
We prepare samples for your approval
03
Quotation & Order
Formal quote, contract and payment
04
Production & Ship
Full QC inspection before delivery

Product Inquiry Form

Sending...

By submitting this form, you agree to be contacted by our sales team. We respect your privacy and will never share your information.

Related Products

You May Also Like

PVC Coated Polyester Fabric Technical Grade
PVC Coated Fabric

PVC Coated Polyester Fabric Technical Grade

<p><strong>PVC Coated Tarpaulin Fabric</strong> — 500D-500D polyester base, 450–900 g/m² double-sided PVC coating with hot-air-weldable seams.</p> <ul> <li>Base fabric denier and coating weight together determine tensile and tear performance, not GSM alone</li> <li>Flame retardant grades available with test-report-backed verification; anti-UV treatment supports extended outdoor exposure</li> <li>Hot-air welding at flex points maintains waterproof integrity where loads shift and stress peaks</li> <li>Custom widths, colours and GSM grades developed by a 10-person R&D team with samples ready in days, backed by 100% pre-shipment inspection across 3 full production lines</li> </ul>

View Details
Laminated PVC Coated Fabric 600gsm 6m by 15m for Truck Covers
PVC Coated Fabric

Laminated PVC Coated Fabric 600gsm 6m by 15m for Truck Covers

<p><strong>Laminated PVC Coated Tarpaulin 600gsm, 6m×15m</strong> — 100% high toughness polyester yarn with hot melt and lamination coating for truck covers and transport applications.</p> <ul> <li>Coating method directly affects adhesion strength and weld behaviour at flex points where loads shift most</li> <li>Base fabric denier (500D–2000D) paired with coating weight determines actual tensile and tear performance</li> <li>UV and flame-retardant treatments available with test report documentation on request</li> <li>100% pre-shipment inspection across every roll with dedicated QA/QC at each production stage</li> </ul>

View Details
680GSM RIPSTOP PVC Tarpaulin Technical Grade
PVC Coated Fabric

680GSM RIPSTOP PVC Tarpaulin Technical Grade

<p><strong>680GSM RIPSTOP PVC Tarpaulin for Builders Roof Tarp and Sheeting</strong> — waterproof PVC coated tarpaulin with reinforced ripstop base fabric, glossy or matte surface, and optional UV or flame retardant treatment.</p> <p>Base denier (200D–1000D) paired with coating weight determines tensile and tear behaviour — higher GSM alone does not guarantee seam strength at flex points. Knife-coated adhesion ensures welded seams hold where the load shifts most.</p> <ul> <li>Custom sizes from 3x4m to 10x12m or roll stock for fabricators</li> <li>100% pre-shipment inspection with GSM verification against your quotation</li> </ul>

View Details

Ready to Place a Bulk Order or Need a Sample?

Factory-direct pricing · Full QC inspection · 20+ countries shipped · OEM/ODM supported