Laminated PVC Coated Fabric for Poultry Curtains – Anti-Static
Laminated PVC Coated Fabric for Poultry Curtains – Anti-Static
ISO 9001 ISO 14001 ISO 45001 CE

Laminated PVC Coated Fabric for Poultry Curtains – Anti-Static

<p><strong>PVC Coated Waterproof Anti-Static Tarpaulin for Poultry Curtains</strong> — 350gsm to 750gsm, high-strength polyester mesh base, hot-melt laminated for consistent coating weight and adhesion. Anti-static treatment verified by test report, with double-sided waterproof performance and cold-crack resistance for agricultural enclosures.</p> <ul> <li>Available in 2m × 75m and 2.1m × 50m rolls, custom widths on request</li> <li>Glossy or matte surface, batch-to-batch color consistency confirmed before dispatch</li> </ul>

Quality
Certified
OEM/ODM
Support
20+ Countries
Exported
+86 137 9310 1270 Reply within 24h

Deep Coating Process Control — Every roll of PVC coated tarpaulin leaving our facility is verified against its stated GSM and coating weight through 100% pre-shipment inspection, ensuring material properties match the specification sheet you received at quotation stage.

Technical Specifications

Parameter Value
Product Type PVC Coated Tarpaulin
Base Material High-strength polyester mesh fabric
Coating Material PVC
Coating Technology Laminated & Hot-melt coating
Available Weight 350gsm / 420gsm / 500gsm / 550gsm / 600gsm / 750gsm
Available Thickness 0.32mm / 0.35mm / 0.4mm / 0.45mm / 0.5mm / 0.65mm
Roll Width 2m / 2.1m
Roll Length 75m (2m width) / 50m (2.1m width)
Surface Finish Glossy or Matt
Waterproof Double-sided 100% waterproof
Colour Options Blue / Red / Yellow / Light blue / Grey / Customised
Cold Crack Resistance Stated
Anti-Mildew Stated
Anti-Static Treatment applied (grade available on request)
UV Protection Sunproof treatment applied (test basis available on request)
Flame Retardant Available in flame retardant grades — confirm the grade required for your market
Standards ISO, CE

Application Suitability

Application Exposure & Requirement
Poultry & Agricultural Curtains Constant humidity, ammonia exposure, daily mechanical rolling, temperature fluctuation
Temporary Construction Enclosures Wind load, rain, UV exposure, dust containment, scaffold abrasion
Truck Side Curtains & Awnings Road debris impact, constant flexing at tie-down points, UV degradation
Equipment & Industrial Covers Chemical splash, outdoor weathering, repeated deployment and folding
Pond & Fish Tank Liners Permanent water immersion, soil chemistry, puncture from substrate
Tent & Membrane Structures Wind uplift, rain pooling, UV load, weld seam integrity under tension

Why a Quoted GSM Is Only Half the Story for PVC Coated Fabric

Coating weight and base fabric denier together determine whether a PVC coated tarpaulin performs as expected or fails at the first stress point.

Procurement teams regularly receive rolls that match the quoted GSM on the label but deliver less material than the specification sheet promised. The discrepancy often comes from a lighter base fabric compensated by a thicker coating layer — a combination that looks right on the scale but tears easily under tension. For technical buyers specifying PVC coated tarpaulin for fabrication, the relationship between GSM, base yarn denier, and coating thickness is where real performance lives [NEED_CITE: tensile and tear test methods for coated fabrics per ISO 1421]. Without this breakdown, you are buying a number, not a material.

How Laminated and Hot-Melt Coating Define Fabric Behaviour

The PVC coated tarpaulin in this range uses both laminated and hot-melt coating technology, each producing different performance characteristics. Laminated coating bonds a pre-formed PVC film to the polyester mesh under heat and pressure, delivering a uniform coating thickness and a smooth surface suited to printing and heat welding. Hot-melt coating applies liquid PVC directly into the mesh structure, penetrating deeper between yarns and creating a stronger mechanical bond. The choice between the two affects peel strength, flexibility at low temperatures, and how the material behaves at welded seams during fabrication.

Surface Finish and Its Role in Field Performance

Selecting between a glossy and matt surface is not purely aesthetic. A glossy finish sheds water and dirt more readily, making it suited to poultry curtains and agricultural enclosures where wash-down cleaning is routine. A matt surface reduces glare and provides better ink adhesion for custom printing, which matters for branded truck covers or event tent panels. Both finishes on this PVC coated tarpaulin are applied to a double-sided waterproof construction, so the choice depends entirely on the end-use environment and fabrication method [NEED_CITE: surface finish impact on weld strength and print adhesion in coated fabrics].

Reading GSM, Thickness, and Tensile Strength Together

A 750gsm PVC coated tarpaulin at 0.65mm thickness will resist puncture and sustained load far better than a 350gsm grade at 0.32mm, but GSM alone does not predict tear propagation behaviour. Tear strength depends heavily on the base polyester mesh — specifically yarn denier and the density of the weave in both warp and weft directions. A high GSM built primarily from coating weight rather than dense yarn will score well on a scale but split under the stress concentrations found at eyelet holes and welded corners. For fabricators welding truck covers or tent structures, understanding the base fabric construction is as critical as knowing the total weight. Thickness correlates with coating mass, which influences flexibility: thinner grades fold and drape more easily, while heavier grades hold shape under wind load but require higher heat settings during welding [NEED_CITE: relationship between polyester mesh denier and tear propagation in PVC coated fabric].

Cross-section diagram showing PVC coating layers bonded to polyester mesh base fabric

The Cost of Overlooking Roll-to-Roll Consistency

When colour varies between rolls in the same order, the problem only becomes visible after installation — panels hung side by side on a building enclosure or welded together on a truck curtain show obvious shade differences that force rejection of the entire batch. This is not a cosmetic complaint; it represents wasted material, labour, and project delay. Colour consistency depends on pigment dosing accuracy during coating and on maintaining uniform oven temperatures across the production run. For buyers ordering multiple rolls of PVC coated tarpaulin in a single colour, requesting a pre-shipment colour reference sample from the production batch is a practical safeguard. Similarly, coating weight variation within a roll creates soft spots that fail prematurely under load, even though the average GSM across the roll meets specification [NEED_CITE: batch colour consistency standards for coated technical textiles].

What Process Control Means for This Material Range

Three full production lines with dedicated coating stations allow laminated and hot-melt processes to run independently, preventing cross-contamination of coating formulations. A 10-person R&D team develops custom colour matches and validates GSM-to-thickness ratios before production begins. QA/QC inspection at every stage — base fabric incoming check, mid-line coating weight measurement, and 100% pre-shipment roll inspection — catches deviations before they reach the buyer. This PVC coated tarpaulin range carries ISO and CE certification, with documentation traceable to specific production batches. Samples for custom widths, colours, and treatment grades are developed within days, allowing specification validation before committing to a full order.

Documentation & Verification

  • Material specification sheet stating exact GSM, base fabric denier, and coating weight for each roll
  • UV and flame retardant test reports supplied where applicable to the ordered grade
  • Pre-shipment inspection record confirming weight and colour against the approved sample
  • Roll packing list with individual roll numbers traceable to production batch
  • Certificate of origin and customs documentation for cross-border shipment

Fabrication, Handling & Storage

  • Hot-melt coated grades require higher weld temperatures than laminated grades; confirm settings on a sample offcut before full production
  • Glossy surface PVC coated tarpaulin responds well to high-frequency welding; matt surface may need adjusted pressure for consistent seam strength
  • Store rolls upright on pallets in a dry, shaded area to prevent permanent creasing and edge damage
  • Allow cold-stored rolls to reach ambient temperature before unrolling to avoid coating crack at low temperature
  • Cut patterns to maximise yield from the 2m or 2.1m roll width and minimise welded seams in high-stress zones

Specify Your Requirement Before Ordering

Technical buyers should confirm the target GSM range, required surface finish, and any treatment grades — such as flame retardant or anti-static — needed for their specific market or project compliance. Provide the end-use application, expected environmental exposure, and whether rolls or finished cut-to-size panels are required. Colour references, custom widths, and annual volume estimates help us allocate production capacity and maintain batch consistency across repeat orders.

Frequently Asked Questions

Q: How is GSM verified and what documentation accompanies each shipment?
A: Every roll undergoes weight verification against the stated GSM during 100% pre-shipment inspection. A material specification sheet detailing GSM, base fabric construction, and coating weight accompanies the shipment, along with a pre-shipment inspection record, roll packing list, and certificate of origin. Test reports for UV and flame retardant grades are included where applicable.

Q: What is the difference between laminated and hot-melt coating for this PVC coated tarpaulin?
A: Laminated coating bonds a pre-formed PVC film to the polyester mesh, producing a uniform thickness ideal for printing and heat welding. Hot-melt coating penetrates deeper into the mesh structure, delivering stronger mechanical adhesion and better peel strength. Your choice depends on the fabrication method and end-use conditions.

Q: How do GSM and thickness correlate to tensile and tear strength?
A: Total GSM reflects combined base fabric and coating weight, while tear strength depends primarily on polyester yarn denier and weave density. Thickness indicates coating mass, influencing flexibility and weld behaviour. We provide full material breakdowns so you can evaluate each property independently for your application.

Q: How is colour consistency maintained across multiple rolls in one order?
A: Pigment dosing is controlled digitally during coating, and oven temperatures are monitored continuously across the production line. Rolls within a single order are produced in the same batch run. A pre-shipment colour reference sample can be provided for buyer approval before dispatch.

Q: Can I get a test report for anti-static or UV treatment?
A: Anti-static treatment is applied to this PVC coated tarpaulin range, and UV protection treatment is available. Test reports are supplied with the shipment for the specific grade ordered. Confirm the test standard required by your market or project specification at the inquiry stage.

Accepting Inquiries

Get a Custom Quote for
Laminated PVC Coated Fabric for Poultry Curtains – Anti-Static

Fill in your requirements and our sales team will respond within 24 hours with a detailed quotation. We support sample orders, bulk production, and OEM/ODM customization.

01
Submit Inquiry
Describe your needs and quantity
02
Sample Confirmation
We prepare samples for your approval
03
Quotation & Order
Formal quote, contract and payment
04
Production & Ship
Full QC inspection before delivery

Product Inquiry Form

Sending...

By submitting this form, you agree to be contacted by our sales team. We respect your privacy and will never share your information.

Related Products

You May Also Like

Custom PVC Coated Tarpaulin 500gsm 600gsm | Knife Coated
PVC Coated Fabric

Custom PVC Coated Tarpaulin 500gsm 600gsm | Knife Coated

<p><strong>PVC Coated Tarpaulin</strong> with 500gsm to 900gsm weight grades, PVC coated polyester base, and customizable sizing for truck cargo beds.</p> <ul> <li>Knife coated fabric where base denier and coating weight together determine tensile and tear performance at flex points</li> <li>Welded seam construction outperforms stitching at high-stress areas where loads shift during transit</li> <li>Backed by 30 years of coated fabric process control, 100% pre-shipment inspection, and full test documentation on request</li> </ul>

View Details
Knife Coated PVC Tarpaulin 500gsm 600gsm for Truck Cargo Cover
PVC Coated Fabric

Knife Coated PVC Tarpaulin 500gsm 600gsm for Truck Cargo Cover

<p><strong>PVC Coated Tarpaulin Waterproof Truck Cargo Cover</strong> available in 500gsm, 600gsm, 700gsm, 850gsm and 900gsm weight grades for truck cargo covers and industrial protection.</p> <ul> <li>Knife coating process bonds PVC to the base fabric for reliable peel strength and consistent welded seams at flex points</li> <li>Treatment options include flame retardant, anti-static, anti-cold and anti-mildew grades with test documentation</li> <li>GSM verified against quotation at every production stage so delivered weight matches specification</li> </ul> <p>100% pre-shipment inspection with material spec sheet and roll packing list included.</p>

View Details
PVC Coated Fabric for Poultry Curtains – Laminated Grade
PVC Coated Fabric

PVC Coated Fabric for Poultry Curtains – Laminated Grade

<p><strong>PVC Coated Tarpaulin</strong> — High-strength polyester mesh base, laminated & hot-melt coating, 350–750gsm, double-sided waterproof with anti-static and anti-mildew treatment.</p> <ul> <li>Base fabric denier and weave matched to tensile and tear demands of poultry curtains, agricultural covers and transport tarps.</li> <li>Laminated and hot-melt coating methods control adhesion strength and weld performance at high-flex seams.</li> <li>Glossy or matt finish in blue, red, yellow, light blue, grey or custom colour.</li> <li>Roll stock at 2m×75m or 2.1m×50m, cut sizes made to order.</li> </ul> <p>Dedicated QA at every production stage with 100% pre-shipment inspection ensures GSM, colour and coating weight match your specification on every roll.</p>

View Details
Technical Grade PVC Coated Fabric with Flame Retardant – Knife Coated
PVC Coated Fabric

Technical Grade PVC Coated Fabric with Flame Retardant – Knife Coated

<p><strong>Waterproof Fire Retardant PVC Tarpaulin Cover, 450-900 g/m², 500D-500D Polyester Base</strong> — knife coated for truck, trailer, and industrial equipment protection.</p> <ul> <li> <p>Base fabric denier and coating weight jointly determine tensile and tear performance across demanding load-covering applications</p> </li> <li> <p>Double-sided PVC coating with integrated anti-UV and flame-retardant chemistry delivers full waterproof sealing and hot air welding compatibility for field fabrication</p> </li> <li> <p>Every roll undergoes 100% pre-shipment inspection against the material specification sheet, backed by dedicated QA/QC at each production stage</p> </li> </ul>

View Details

Ready to Place a Bulk Order or Need a Sample?

Factory-direct pricing · Full QC inspection · 20+ countries shipped · OEM/ODM supported