PVC Coated Tarpaulin Knife Coated Grade for Truck Cargo Cover
PVC Coated Tarpaulin Knife Coated Grade for Truck Cargo Cover
ISO 9001 ISO 14001 ISO 45001 CE

PVC Coated Tarpaulin Knife Coated Grade for Truck Cargo Cover

<p><strong>PVC Coated Tarpaulin 700gsm / 850gsm / 900gsm</strong> — waterproof with optional flame retardant and anti-static treatments, designed for truck cargo covers and heavy-duty outdoor load protection.</p> <ul> <li>Knife-coated adhesion control ensures weld and seam integrity at high-flex points during transport</li> <li>Base fabric denier and weave density matched to tensile and tear demands across each GSM grade</li> <li>Batch-to-batch GSM and colour consistency verified by 100% pre-shipment inspection</li> </ul> <p>Supported by nearly 30 years of coated fabric process control, three full production lines, and dedicated QA at every stage from coating to dispatch.</p>

Quality
Certified
OEM/ODM
Support
20+ Countries
Exported
+86 137 9310 1270 Reply within 24h

Coating Adhesion Control — Every roll of this PVC coated tarpaulin undergoes in-process peel strength checks to ensure the bond between base fabric and coating survives repeated flexing at weld and seam lines.

Technical Specifications

Parameter Value
Product Type PVC Coated Tarpaulin
Weight (GSM) 700gsm, 850gsm, 900gsm (confirm grade for your application)
Coating Material PVC
Coating Method Knife coated
Flame Retardant Available — confirm the grade required for your market
Anti-Static Available — surface resistance value not stated in source
Anti-Cold Available — test basis not stated in source
Anti-Mildew Available — test basis not stated in source
Weather Resistance Suited to extended outdoor exposure
Waterproof Fully waterproof coated construction

Application Suitability

Application Exposure & Requirement
Truck cargo cover Road abrasion, wind loading, UV exposure, repeated tie-down stress
Side curtain and trailer curtain Constant flexing at fold points, weld seam integrity, weather sealing
Outdoor equipment cover Prolonged sun and rain exposure, mildew risk in humid storage
Industrial site cover Dust and moisture protection, handling abrasion from daily rigging

Why GSM Alone Does Not Tell You How Strong PVC Coated Tarpaulin Fabric Really Is

Coating weight and base fabric density must be evaluated together — a heavier GSM on a loose weave will tear before a lighter grade on a tight one.

When a buyer specifies 850gsm PVC coated tarpaulin material and the roll arrives weighing less, the issue is rarely a simple scale error. Coating thickness can vary across the roll width, and some suppliers quote total GSM while the base fabric carries a lower denier than expected. The result is a cover that passes a weight check on a small swatch but fails at the flex point where the load shifts most [NEED_CITE: tensile and tear test methods for coated fabrics per ISO 1421]. Without a material specification sheet that separates base fabric weight from coating weight, the quoted GSM tells only half the story.

PVC coated tarpaulin knife coated grade for truck cargo cover

Base Fabric Construction Determines Real-World Tensile Performance

The tensile and tear behaviour of this PVC coated tarpaulin material depends on the denier of the yarn and the weave density of the base fabric, not the coating alone. A tightly woven polyester scrim distributes load across multiple yarns, delaying tear propagation when the fabric catches on a sharp corner or flexes under wind load. Coating weight adds body and weather resistance, but it cannot compensate for a loosely woven base when the material is pulled at a tie-down point. Technical buyers specifying PVC coated fabric for side curtains and trailer covers should request the base fabric denier and thread count alongside the GSM to evaluate the complete construction.

Coating Adhesion and Weld Behaviour at Flex Points

Knife coating deposits PVC paste directly onto the base fabric and cures it under controlled temperature, creating a mechanical and chemical bond that resists delamination. For fabricators who hot-air weld seams on truck covers and side curtains, this bond is critical — a poorly adhered coating will separate from the scrim at the weld line long before the fabric itself fails [NEED_CITE: peel strength test methods for PVC coated fabrics]. The coating method also influences how the material responds to high-frequency welding, where consistent coating thickness ensures an even melt across the seam. Fabricators working with this PVC coated tarpaulin material should run test welds on sample pieces to confirm optimal temperature and dwell time for the chosen GSM grade.

Interpreting Weight, Treatment, and Weather Resistance Together

A 700gsm grade serves applications where weight and pack size matter, such as temporary cargo covers that are handled daily, while 900gsm suits permanent side curtains exposed to continuous highway wind and abrasion. The flame retardant, anti-static, anti-cold, and anti-mildew options are treatment additions rather than inherent coating properties, and their performance depends on the formulation used during production. Weather resistance for extended outdoor exposure is influenced by UV stabiliser loading and surface finish, both of which should be confirmed with a test report before the material is specified for a long-term outdoor installation. Buyers sourcing PVC coated fabric for transport and industrial covers should match the GSM grade to the mechanical load and select treatments based on documented test results rather than catalogue claims [NEED_CITE: DIN 4102 fire classification for building materials].

PVC coating layer cross-section and polyester base fabric weave detail

What Happens When Specification Verification Is Skipped

A truck fleet operator orders side curtain fabric by GSM alone, and the rolls arrive within tolerance on a bench scale. Once installed, the curtains develop seam failures at the fold points within months because the coating adhesion was insufficient for repeated flexing. In another case, a distributor receives a container of PVC coated tarpaulin material with colour variation between rolls, forcing the customer to reject the batch after partial installation. These outcomes trace back to gaps in the specification and inspection process — GSM verified without checking coating adhesion, or colour approved on a single swatch rather than across the production run [NEED_CITE: roll-to-roll colour consistency standards for coated fabrics]. The cost of a failed cover far exceeds the time spent requesting test reports and pre-shipment inspection records before dispatch.

Production Controls Behind Every Roll

Deep process control over coating weight and adhesion is maintained across three full production lines, allowing bulk orders of this PVC coated tarpaulin material to ship with consistent GSM and finish. A 10-person R&D team handles material selection, custom width development, and sample production, so technical buyers can evaluate the exact grade and treatment before committing to a full order. Dedicated quality checks at every stage — from base fabric inspection to final coating cure — mean that each roll is verified against the material specification sheet. The result is PVC coated fabric that arrives with the documented weight, treatment, and colour the buyer specified, not a substitute grade.

Documentation & Verification

  • Material specification sheet stating GSM, base fabric denier, and coating weight for each roll grade
  • Test reports for flame retardant and anti-static treatments matched to the batch supplied
  • Pre-shipment inspection record with roll-by-roll weight and colour verification
  • ISO and CE certificates included with dispatch documentation
  • Certificate of origin and customs support paperwork provided per shipment

Fabrication, Handling & Storage

  • Hot-air weld temperature and speed must be adjusted to the specific GSM grade to avoid coating burn-through on 700gsm or incomplete fusion on 900gsm
  • Store rolls upright on a flat surface to prevent permanent creasing that weakens the PVC coating at the fold line
  • Allow cold-stored rolls to reach ambient temperature before unrolling to avoid cracking the coating in anti-cold grades
  • Use PVC-compatible cleaners only — solvents can dissolve the plasticiser and reduce coating flexibility over time
  • Plan cutting layouts to maximise yield from the roll width and minimise transverse welds on long side curtain panels

What We Need to Quote Your PVC Coated Fabric Requirement

Provide the intended application and the mechanical loads the cover will face — static cargo weight, wind exposure, flexing frequency at fold points. Specify the GSM grade you have evaluated or the tensile and tear performance your end product requires. Confirm any flame retardant, anti-static, or anti-mildew treatments needed, along with the test standard your market or site demands. Include required roll width, colour reference, and estimated annual volume so we can align production scheduling with your delivery plan.

Frequently Asked Questions

Q: How is the stated GSM verified before the PVC coated tarpaulin material ships?
A: Each roll is weighed and checked against the material specification sheet during pre-shipment inspection. The record documents the base fabric weight and coating weight separately, so buyers can confirm that the GSM matches the purchase order rather than relying on a batch average. This roll-by-roll verification is included with the dispatch documentation.

Q: What test reports accompany flame retardant and anti-static grades?
A: Where a specific treatment grade is requested, a test report from the production batch is supplied with the shipment. The report states the test method and the result achieved. Buyers should confirm the fire classification or surface resistance value required by their local regulations so the correct grade is produced and documented.

Q: Can custom widths and colours be supplied with roll-to-roll consistency?
A: Custom widths are developed through the R&D team and validated on sample rolls before bulk production. Colour is matched to a reference standard, and consistency across rolls in the same order is verified during pre-shipment inspection. Buyers specifying side-by-side installation should request the colour verification record with their dispatch documentation.

Q: What documentation ships with each order of PVC coated tarpaulin?
A: Every shipment includes a material specification sheet, roll packing list, pre-shipment inspection record, and applicable test reports for treatments ordered. ISO and CE certificates and a certificate of origin are also provided. Additional customs documentation can be prepared based on the destination country’s import requirements.

Q: How are welded seam performance and coating adhesion controlled in production?
A: The knife coating process bonds PVC to the base fabric under controlled temperature and cure time, and peel strength is checked during in-process quality inspections. Fabricators should still run weld tests on sample pieces to set machine parameters for the specific GSM grade and treatment combination they receive.

Accepting Inquiries

Get a Custom Quote for
PVC Coated Tarpaulin Knife Coated Grade for Truck Cargo Cover

Fill in your requirements and our sales team will respond within 24 hours with a detailed quotation. We support sample orders, bulk production, and OEM/ODM customization.

01
Submit Inquiry
Describe your needs and quantity
02
Sample Confirmation
We prepare samples for your approval
03
Quotation & Order
Formal quote, contract and payment
04
Production & Ship
Full QC inspection before delivery

Product Inquiry Form

Sending...

By submitting this form, you agree to be contacted by our sales team. We respect your privacy and will never share your information.

Related Products

You May Also Like

PVC Coated Fabric Technical Grade for Truck Cargo Cover
PVC Coated Fabric

PVC Coated Fabric Technical Grade for Truck Cargo Cover

<p><strong>PVC Coated Tarpaulin</strong> for truck and cargo covers, available in 700gsm, 850gsm and 900gsm with flame retardant, anti-static, anti-cold and anti-mildew treatment options.</p> <ul> <li>Base fabric denier and weave matched to target GSM, with coating weight controlled at every stage for verified areal density on arrival</li> <li>Roll-to-roll colour consistency maintained through dedicated QA at coating and finishing, so side-by-side panels show no visible variation</li> <li>Welded seam integrity managed through precise heat-weld parameters, holding firm at flex points where loads shift most</li> </ul> <p>Backed by nearly 30 years of coated fabric process control, 100% pre-shipment roll inspection, and full material documentation including spec sheets and test reports.</p>

View Details
PVC Coated Woven Tarpaulin Fabric Technical Grade
PVC Coated Fabric

PVC Coated Woven Tarpaulin Fabric Technical Grade

<p><strong>PVC Coated Woven Tarpaulin Fabric — 250–1500 GSM, 200D×300D to 1000D×1000D Denier</strong> — glossy or matte finish with waterproof, UV and anti-fungal treatment.</p> <ul> <li>Base fabric denier and coating weight jointly determine tensile and tear performance; higher GSM alone does not guarantee durability.</li> <li>Coating adhesion is controlled through deep process knowledge accumulated over nearly 30 years of production, ensuring consistent weld and seam strength at flex points.</li> </ul> <p>Backed by 100% pre-shipment inspection with full roll-to-roll verification and test-report-supported treatment claims for every batch dispatched.</p>

View Details
620gsm PVC Coated Tarpaulin Fabric Roll for Membrane Structure – Technical Grade
PVC Coated Fabric

620gsm PVC Coated Tarpaulin Fabric Roll for Membrane Structure – Technical Grade

<p><strong>620gsm PVC Coated Tarpaulin Fabric Roll, 100% Polyester Base, Hot Melt Coating</strong> — engineered for membrane structures and tensioned architectural covers requiring verified tensile performance and seam reliability.</p> <ul> <li>1000D knitting density with warp tensile 2000–2500 N/5cm</li> <li>Hot melt coating technology for superior adhesive strength and weld seam integrity</li> <li>GSM-to-thickness relationship verified at every production stage</li> <li>Flame retardant, anti-static, and UV treatments available with test reports</li> </ul> <p>Jinxiang's 10-person R&D team develops custom samples within days for specific denier, GSM, and treatment combinations.</p>

View Details
620gsm PVC Coated Fabric for Membrane Structure – Laminated Grade
PVC Coated Fabric

620gsm PVC Coated Fabric for Membrane Structure – Laminated Grade

<p><strong>PVC Coated Tarpaulin for Membrane Structure, 400-1500 g/m², 500D-2000D, 0.35-1.5 mm</strong> — lamination and hot melt coating with tensile strength up to 3000 N/5cm warp. Base fabric denier and coating weight are matched to deliver predictable structural load performance. Lamination ensures strong coating adhesion and reliable weld seam behaviour at flex points. Dedicated QA verifies actual GSM against specification before dispatch, backed by ISO and CE documentation.</p>

View Details

Ready to Place a Bulk Order or Need a Sample?

Factory-direct pricing · Full QC inspection · 20+ countries shipped · OEM/ODM supported