630 Gsm PVC Coated Tarpaulin Roll | Knife Coated
630 Gsm PVC Coated Tarpaulin Roll | Knife Coated
ISO 9001 ISO 14001 ISO 45001 CE

630 Gsm PVC Coated Tarpaulin Roll | Knife Coated

<p><strong>PVC Coated Tarpaulin 630 Gsm, Knife Coated, 1000DX1000D Denier</strong> — waterproof with UV and flame-retardant treatment, glossy or matte surface options.</p> <p>GSM and base fabric denier together determine tensile and tear behaviour, not weight alone. Knife coating delivers stronger adhesion at welded seams compared to laminated alternatives, critical where the load flexes most during transport.</p> <ul> <li>3 full production lines with 100% pre-shipment inspection on every roll</li> <li>Custom width, colour and treatment verified by test report before dispatch</li> <li>Dedicated QA at each coating stage ensuring batch-to-batch consistency</li> </ul>

Quality
Certified
OEM/ODM
Support
20+ Countries
Exported
+86 137 9310 1270 Reply within 24h

Coating Adhesion Control — PVC paste penetration depth monitored across all three production lines to maintain consistent bond strength at the base fabric interface for every roll shipped.

Technical Specifications

Parameter Value
Product Type PVC Coated Tarpaulin
Specification 630 Gsm Blue/Grey/Orange Pvc Tarpaulin Roll Pvc Tarpaulin Truck Tarpaulin Pvc Coated Tarpaulin
Weight 630 GSM
Base Fabric Denier Options 200D×300D, 500D×500D, 840D×840D, 1000D×1000D
Coating Material PVC
Surface Finish Available in glossy or matte
Temperature Range -15°C to 70°C
Waterproof Yes
UV Treatment Customized (test basis not stated)
Flame Retardant Available in flame retardant grades — confirm the grade required for your market
Anti-Fungal Treated (standard not stated)
Key Features Waterproof, eco-friendly coating, rain-resistant, good flexibility and adhesion strength, abrasion resistance
Working Life Suited to extended outdoor exposure depending on environment
Certification ISO, CE

Application Suitability

Application Exposure & Requirement
Truck side curtains Constant flexing at tie-down points, road debris abrasion, prolonged UV and weather exposure
Trailer load covers Wind uplift forces, load shifting friction, water pooling resistance
Tent and awning panels Structural tension, seasonal UV cycles, fold-line creasing during pack-down
Equipment protective covers Dust ingress prevention, moisture barrier, contact with oils and mild solvents
Industrial warehouse dividers Indoor flame retardant requirements, frequent repositioning, forklift contact abrasion

Why GSM Alone Does Not Tell You How Strong the PVC Coated Tarpaulin 630 GSM Fabric Actually Is

A quoted GSM figure without confirmed base fabric denier and coating weight per side leaves the structural behaviour of the material undefined.

Technical buyers routinely receive rolls that meet the stated 630 GSM weight on paper yet exhibit different tensile and tear responses once fabricated. The discrepancy often traces back to the base weave: a 200D×300D yarn at 630 GSM carries more PVC coating by proportion than a 1000D×1000D yarn at the same total weight, producing a heavier-coated but structurally lighter fabric. Without a specification sheet that breaks out base fabric weight and coating weight separately, two rolls with identical GSM can behave very differently under load [NEED_CITE: tensile and tear test methods for coated fabrics per ISO 1421].

630 GSM PVC coated tarpaulin roll showing knife-coated PVC layers and polyester base fabric weave structure

Base Fabric Denier and Tensile Behaviour at 630 GSM

The denier options available for this PVC coated tarpaulin 630 GSM grade — 200D×300D through 1000D×1000D — directly shape how the material handles tensile load. Higher denier yarns in the warp and weft distribute stress across more filament bundles, raising the force required to initiate a tear. For fabricators producing truck side curtains, selecting 840D×840D or 1000D×1000D provides the structural backbone needed at curtain flex zones, while 500D×500D remains sufficient for static covers with minimal movement.

Coating Penetration and Weld Integrity

The knife-coated PVC formulation used on this fabric determines how thoroughly the paste penetrates the base weave. Adequate penetration locks the yarns in place and creates a coating-to-yarn bond that resists delamination during hot-air welding. When coating adhesion is insufficient, the weld line may hold initially but separate under repeated flexing — a failure mode common in side curtain applications where the fabric folds at the same line every journey. Glossy finishes tend to accept heat welds at slightly different temperature windows than matte finishes, and fabricators should confirm their welding parameters against the specific surface option selected [NEED_CITE: DIN 53354 peel adhesion testing for coated textiles].

How Denier, Coating Weight and Finish Interact in Practice

A 630 GSM roll built on a 1000D×1000D base will carry proportionally less PVC coating than one on a 200D×300D base, meaning the heavier denier fabric may show lower surface gloss and a more textured hand feel despite identical total weight. The coating method itself — knife-over-edge versus knife-over-roll — influences how evenly the PVC paste fills the weave interstices, affecting both the visual uniformity and the seam peeling strength. Temperature operating range from -15°C to 70°C means the material retains flexibility in cool conditions but approaches softening thresholds in direct summer sun on dark-coloured truck covers, a factor worth considering when specifying colour for fleet applications. Glossy surfaces shed dirt more readily and accept printed branding more sharply, while matte surfaces reduce glare on construction site enclosures and resist showing scuff marks during handling.

Cross-section view of knife-coated PVC layers showing paste penetration into polyester base fabric weave

The Hidden Cost of Specifying on Weight Without Verification

When an order arrives and the rolls measure below the quoted 630 GSM, the consequences cascade through the fabrication process. Thinner coating reduces the material available for a strong weld, so seams fail at lower peel forces than expected. A lighter base fabric may pass initial visual inspection but tear prematurely at eyelet or tie-down points once the finished cover enters service. Batch-to-batch weight variation across a single container load also creates inconsistency — panels cut from lighter rolls behave differently from those cut from heavier rolls, producing unpredictable results on the same production line [NEED_CITE: pre-shipment inspection protocols for coated fabric weight consistency].

Why Fabricators Source This Grade From Jinxiang

Three full production lines equipped with 36 sets of professional coating equipment support consistent output volume across repeat orders. A dedicated 10-person R&D team handles denier selection, coating weight adjustment and sample development for custom requirements. Every roll undergoes 100% pre-shipment inspection with weight verification against the stated specification before dispatch. Custom samples are developed within days, allowing fabricators to confirm weld parameters and colour match before committing to full production. ISO and CE certified production ensures the coating process meets recognised quality management frameworks.

Documentation & Verification

  • Material specification sheet confirming 630 GSM, selected base fabric denier and coating weight per side
  • Test report for UV and flame retardant grades where applicable — claims backed by documented results
  • Pre-shipment inspection record with roll-by-roll weight and colour verification
  • ISO and CE certificates with scope covering coated fabric manufacturing
  • Roll packing list with batch identification for traceability

Fabrication, Handling & Storage

  • Set hot-air welder temperature to match glossy or matte surface finish selected for the 630 GSM grade
  • Allow 15 mm minimum overlap for wedge welding to ensure full adhesion across the PVC coating layer
  • Store rolls upright on pallets to prevent permanent creasing through the coated surface
  • Unroll and acclimatise at above 10°C before fabrication to maintain coating flexibility at -15°C lower limit
  • Use PVC-compatible solvent cleaners to avoid degrading the coating adhesion on finished covers

What to Include With Your Enquiry

Provide your intended application and the environmental conditions the finished product will face — whether the fabric will flex continuously on a truck curtain or remain static as a warehouse partition. Specify the base fabric denier that matches your strength requirements and confirm whether your market mandates a particular flame retardant grade. Indicate your required roll width, colour preference and whether glossy or matte finish suits your fabrication process, so a matched sample can be prepared.

Frequently Asked Questions

Q: How should I verify the 630 GSM weight when rolls arrive?
A: Cut a measured sample from each roll — a 10 cm × 10 cm square is sufficient — and weigh it on a calibrated scale. Compare the result against the material specification sheet provided with your shipment. Request a pre-shipment inspection record that documents weight per roll, so any discrepancies are identified before the container leaves the factory.

Q: Which base fabric denier should I choose for truck side curtains?
A: Higher denier options such as 840D×840D or 1000D×1000D provide greater tensile strength for side curtain applications where the fabric flexes repeatedly during loading and unloading. Lower denier options like 500D×500D suit static covers with less mechanical stress. Request denier-specific samples to confirm weld behaviour before ordering.

Q: Can UV and flame retardant performance be verified with test reports?
A: UV treatment and flame retardant grades are available as customised options. Specify the test standard required for your market and region when enquiring, and request documented test results rather than relying on generic treatment claims. This ensures compliance evidence is available for your end client or regulatory body.

Q: How is colour consistency maintained across multiple rolls in one order?
A: Each production batch is monitored for colour uniformity before packing. Request a pre-shipment inspection record that includes colour verification across all rolls in your order. If your project involves installing panels side by side, confirm colour matching requirements during the sample approval stage to avoid visible variation.

Q: What welding parameters work best with this PVC coated fabric?
A: Welding temperature and speed depend on whether you select glossy or matte finish and which denier option is specified. Hot-air and wedge welding are both compatible. Request a fabrication sample to establish your machine settings — coating adhesion strength and surface finish both influence the optimal heat and pressure window.

Accepting Inquiries

Get a Custom Quote for
630 Gsm PVC Coated Tarpaulin Roll | Knife Coated

Fill in your requirements and our sales team will respond within 24 hours with a detailed quotation. We support sample orders, bulk production, and OEM/ODM customization.

01
Submit Inquiry
Describe your needs and quantity
02
Sample Confirmation
We prepare samples for your approval
03
Quotation & Order
Formal quote, contract and payment
04
Production & Ship
Full QC inspection before delivery

Product Inquiry Form

Sending...

By submitting this form, you agree to be contacted by our sales team. We respect your privacy and will never share your information.

Related Products

You May Also Like

Technical Grade PVC Coated Fabric for Industrial Covers
PVC Coated Fabric

Technical Grade PVC Coated Fabric for Industrial Covers

<p><strong>PVC Coated Fabric</strong> with woven base structure, minimum 450 GSM weight, and waterproof PVC vinyl surface treatment for industrial cover applications.</p> <ul> <li>Coating weight and base fabric denier together determine tensile and tear performance at load-bearing flex points, not GSM alone</li> <li>Knife coating process ensures strong adhesion between base fabric and PVC layers, supporting reliable heat-welded seams that match material strength</li> <li>Backed by 30 years of coating process control with dedicated QA at every production stage and 100% pre-shipment inspection on roll weight and colour consistency</li> </ul>

View Details
PVC Coated Fabric with High-strength Waterproofing – Technical Grade
PVC Coated Fabric

PVC Coated Fabric with High-strength Waterproofing – Technical Grade

<p><strong>PVC Coated Fabric</strong> with woven base construction and full waterproof PVC coating at 450 GSM.</p> <ul> <li>Base fabric denier and weave density control tensile and tear behaviour under load</li> <li>Coating adhesion managed to resist delamination at flex and weld points</li> <li>GSM verified at every production stage with 100% inspection before dispatch</li> </ul> <p>Supported by a 10-person R&D team for custom width, colour and sample development within days.</p>

View Details
Laminated PVC Coated Polyester Fabric - Technical Grade
PVC Coated Fabric

Laminated PVC Coated Polyester Fabric - Technical Grade

<p><strong>PVC Coated Tarpaulin</strong> with 400–1500 g/m² weight range, 500D–2000D polyester base fabric, and 0.35–1.5 mm thickness options for medium to super heavy-duty applications. Lamination and hot melt coating technology ensures consistent adhesion between the high tenacity polyester yarn and PVC layers, delivering excellent welding tear strength at critical flex points. Available with flame retardant, anti-static, cold prevention, and mold prevention treatments.</p> <ul> <li>Three weight grades: 400–500 g/m² medium, 700–1000 g/m² heavy, 1100–1500 g/m² super heavy</li> <li>Tensile strength up to 3000 N/5cm warp, 2800 N/5cm weft on super heavy grade</li> <li>Custom widths, colors, and pattern printing with ISO and CE certified production</li> <li>3–5 years outdoor weather resistance with waterproof, cold resistant, and mold proof performance</li> </ul> <p>Material specification sheets provided with exact GSM verification, base fabric denier, and coating weight documentation. Nearly 30 years of coated fabric expertise with 100% pre-shipment inspection and dedicated QA/QC at every production stage.</p>

View Details
PVC Coated Tarpaulin 3 Meter Width – Knife Coated
PVC Coated Fabric

PVC Coated Tarpaulin 3 Meter Width – Knife Coated

<p><strong>PVC Coated Tarpaulin</strong> — 250gsm-1500gsm weight range with 200D to 1000D base fabric options, knife coated for strong adhesion and reliable heat-welding performance. Glossy or matte surface finishes available to match installation requirements and cleaning needs.</p> <ul> <li>UV, flame-retardant and anti-fungal treatments applied to specification</li> <li>Custom sizes from 3x4m to 10x12m or made-to-order dimensions</li> <li>Eco-friendly formulation with working life of 3-10 years depending on environment</li> </ul> <p>Three full production lines and 36 sets of equipment ensure bulk capacity with consistent on-time delivery for roll-stock orders.</p>

View Details

Ready to Place a Bulk Order or Need a Sample?

Factory-direct pricing · Full QC inspection · 20+ countries shipped · OEM/ODM supported