PVC Coated Fabric 650gsm for Trucks – Laminated
PVC Coated Fabric 650gsm for Trucks – Laminated
ISO 9001 ISO 14001 ISO 45001 CE

PVC Coated Fabric 650gsm for Trucks – Laminated

<p><strong>PVC Coated Fabric 650gsm for Trucks – Laminated</strong> with 100% high toughness polyester yarn, hot melt lamination technology, waterproof and cold resistant cracking performance.</p> <ul> <li>Base fabric denier and coating weight jointly determine tensile and tear behaviour; lamination ensures consistent adhesion under thermal cycling and UV exposure.</li> <li>Custom sheet dimensions and eyelet reinforcement patterns matched to specific trailer models prevent seam failure at flex points.</li> </ul> <p>Backed by 3 full production lines, 100% pre-shipment inspection, and a 10-person R&D team handling material selection and sample development within days.</p>

Quality
Certified
OEM/ODM
Support
20+ Countries
Exported
+86 137 9310 1270 Reply within 24h

Dual Coating Control — Hot melt and lamination technologies applied across three dedicated lines ensure coating adhesion and consistent weight verified at every production stage.

Technical Specifications

Parameter Value
Product Type PVC Coated Fabric
Weight 650 g/m²
Base Fabric 100% high toughness polyester yarn
Coating Material PVC
Coating Method Lamination technology and hot melt coating technology
Tensile Strength (N/5cm) Confirm grade-specific value with test report
Flame Retardant Available in flame retardant grades — confirm the grade required for your market
Anti-Static Available with anti-static treatment — confirm the standard required for your application
Anti-UV Available with anti-UV treatment — confirm test basis and expected service life
Anti-Mildew Mold proof
Cold Resistance Cold resistant cracking
Waterproof Fully waterproof coated construction
Welding Tear Strength Excellent welding tear strength — request test data
Eyelet & Hem With eyelets
Size 12m by 12m
Certifications ISO, CE

Application Suitability

Application Exposure & Requirement
Truck and trailer tarpaulin sheets Constant flexing at load points, road debris abrasion, UV and weather cycling, tie-down tension at eyelets
Engineering protective cloth Dust and moisture ingress, mechanical contact, site handling and repositioning
Industrial pipe canopy covers Water pooling, wind uplift, thermal expansion and contraction of substrate
Tensioned structural fabric Sustained biaxial tension, UV exposure on both faces, weld integrity at seam junctions
Farm machinery covers Abrasion from vibrating equipment, chemical contact from fertilisers, repeated fold and unfold cycles

Why GSM Verification Matters More Than the Number on the Quotation

The weight stated on a quotation means nothing unless it is verified on the fabric you receive.

PVC Coated Tarpaulin 650gsm sits in a mid-to-heavy range that buyers specify for transport and industrial covers where both flexibility and strength matter. Yet the gap between quoted GSM and delivered weight is one of the most common disputes in coated fabric procurement. A sheet that arrives lighter than specified will show reduced tensile capacity, thinner coating layers, and shorter service life under the same operating conditions. [NEED_CITE: coated fabric weight verification methods per ISO testing standards]

Coating Adhesion and Dual-Technology Process

The 650gsm PVC coated polyester fabric is produced using both lamination and hot melt coating technology. Lamination bonds pre-formed PVC films to the polyester substrate under heat and pressure, while hot melt coating applies liquid PVC directly to the woven base. This dual-technology approach allows tighter control over coating weight distribution across the fabric surface, reducing the risk of thin spots that become failure origins under tension or flex.

Weld Integrity at High-Stress Junctions

Trailer covers experience repeated bending and load shift, concentrating stress at welded seams. The hot melt coating method produces a coating layer that integrates with the base yarn structure, supporting welds that hold at flex points where cargo movement creates the highest cyclic loading. PVC Coated Tarpaulin 650gsm sheets are supplied with eyelets for tie-down, meaning the perimeter reinforcement must transfer load into the fabric body without tearing at the eyelet boundary. [NEED_CITE: welding tear strength test methods for PVC coated fabrics]

Reading the Specification Sheet Correctly

The 650gsm weight reflects total fabric mass including base yarn and both coating faces. Base fabric denier and knitting density determine how that weight is distributed between structure and coating. A heavier coating on a lighter base may achieve the same GSM but will show different tear propagation behaviour compared to a heavier base with thinner coating. Buyers specifying PVC Coated Tarpaulin 650gsm should request the material specification sheet showing base fabric denier, knitting density, and coating weight separately — not just the total GSM figure.

650gsm PVC coated polyester tarpaulin cross-section showing coating layers and base fabric weave

What Happens When Treatment Claims Lack Test Evidence

Flame retardant and anti-UV treatments are frequently quoted without supporting test documentation. A buyer who receives PVC coated fabric marked as flame retardant but without a grade reference cannot verify compliance with local fire safety codes at the installation site. Similarly, anti-UV claims without a stated test basis leave the buyer unable to predict how the material will perform through seasonal exposure cycles. Always request the specific test standard — such as DIN 4102 for flame classification or ISO 4892 for UV weathering — before confirming the order. [NEED_CITE: fire classification standards applicable to PVC coated tarpaulins in transport and construction]

Why Buyers Choose This Supply Source

Every roll of 650gsm PVC coated fabric undergoes QA checks at coating, curing, and winding stages, with 100% pre-shipment inspection confirming weight and surface quality against the order specification. The 10-person R&D team develops samples within days when custom sizes, eyelet spacing, or hem reinforcement patterns are required, so you can verify fit and fabrication before committing to full production. Hot melt and lamination dual-technology lines give process flexibility to match coating characteristics to your specific application demands — whether that means prioritising weld strength for trailer side curtains or surface smoothness for tensioned structures. Each dispatch ships with a material specification sheet and pre-shipment inspection record, giving you documented evidence that the fabric received matches what was agreed.

Documentation & Verification

  • Material specification sheet stating 650gsm weight, base fabric denier, and dual coating method
  • Test reports for UV and flame retardant grades where applicable to your market requirements
  • Pre-shipment inspection record confirming weight and surface quality per roll before dispatch
  • Roll packing list with individual roll dimensions and net weight for customs clearance
  • ISO and CE certificates covering production management and product compliance

Fabrication, Handling & Storage

  • Hot melt coated surfaces require calibrated heat settings during welding to avoid coating burn-through on 650gsm material
  • Eyelet spacing on 12m by 12m sheets should be confirmed against your specific tie-down hardware configuration
  • Store rolls horizontally on flat pallets to prevent permanent creasing in the PVC coating layer
  • Unfold sheets in moderate temperatures to reduce cold-cracking risk during winter handling operations
  • Use mild detergent for cleaning — solvent-based products may degrade the PVC coating surface
  • Repair minor tears with compatible PVC weld patches applied at manufacturer-recommended temperatures

Requesting a Quotation

To specify PVC Coated Tarpaulin 650gsm sheets for your application, provide the intended use case and exposure conditions so we can recommend the correct treatment options. If your market requires specific fire classification or anti-static standards, state the applicable code in your initial inquiry. Confirm whether you need finished sheets with eyelets and reinforced hems or roll stock for your own fabrication, and include your target dimensions and annual volume.

Frequently Asked Questions

Q: How can I verify the 650gsm weight matches the quotation when the shipment arrives?
A: Request a pre-shipment inspection record with per-roll weight data before dispatch. On arrival, use a calibrated GSM cutter and precision scale to sample from multiple rolls. The material specification sheet shipped with your order states the agreed weight, base fabric denier, and coating method for direct comparison against your measurements.

Q: Which flame retardant grade should I specify for truck and trailer covers?
A: The applicable grade depends on your regional transport safety regulations and the environments where the covers will be used. Available flame retardant options can be matched to specific standards once you confirm the code required in your market. Request the test report for the selected grade before placing your production order.

Q: How is UV treatment validated for outdoor exposure on PVC coated tarpaulins?
A: Anti-UV treatment is available with supporting test data upon request. Provide your expected exposure conditions and geographic location so we can recommend the appropriate treatment level. Test reports reference specific weathering standards that quantify how the coating performs under accelerated or natural UV exposure cycles.

Q: Can I specify custom eyelet spacing and hem reinforcement for 12m by 12m sheets?
A: Yes. Eyelet diameter, spacing interval, and hem reinforcement width are confirmed during the sample development stage. The R&D team produces a sample with your exact specification so you can test fit and load distribution before full production begins. Welding is used instead of stitching at high-flex zones to maintain seam integrity.

Q: What is the difference between welded and stitched seams on trailer tarpaulin covers?
A: Welded seams fuse the PVC coating layers together, creating a continuous bond that resists separation under cyclic flexing. Stitched seams introduce needle perforations that can become tear initiation points where the load shifts most. For trailer covers, welding is the preferred method at stress-concentrated junctions to maintain long-term seam performance.

Accepting Inquiries

Get a Custom Quote for
PVC Coated Fabric 650gsm for Trucks – Laminated

Fill in your requirements and our sales team will respond within 24 hours with a detailed quotation. We support sample orders, bulk production, and OEM/ODM customization.

01
Submit Inquiry
Describe your needs and quantity
02
Sample Confirmation
We prepare samples for your approval
03
Quotation & Order
Formal quote, contract and payment
04
Production & Ship
Full QC inspection before delivery

Product Inquiry Form

Sending...

By submitting this form, you agree to be contacted by our sales team. We respect your privacy and will never share your information.

Related Products

You May Also Like

Laminated Fire Retardant PVC Coated Fabric for Warehouse – Technical Grade
PVC Coated Fabric

Laminated Fire Retardant PVC Coated Fabric for Warehouse – Technical Grade

<p><strong>Fire Retardant B1 Standard Waterproof PVC Tarpaulin</strong> — PVC coated tarpaulin fabric in medium (400–500 g/m², 500D), heavy (700–1000 g/m², 1000D) and super heavy-duty (1100–1500 g/m², up to 2000D) grades.</p> <ul> <li>Lamination and hot melt coating deliver strong peel adhesion and reliable heat-welded seam performance across all weight classes.</li> <li>B1 flame retardant, anti-static, UV and cold-resistant treatments available with verifiable test documentation.</li> <li>Supported by a 10-person R&D team handling custom width, colour and pattern printing with samples developed within days.</li> </ul> <p>1</p>

View Details
Knife Coated PVC Coated Fabric for Industrial Coverings
PVC Coated Fabric

Knife Coated PVC Coated Fabric for Industrial Coverings

<p><strong>PVC Coated Tarpaulin</strong> — at least 450 g/m², woven base fabric with PVC knife coated finish, delivering waterproof, tear-resistant and anti-UV performance for industrial and outdoor coverings.</p> <ul> <li>Knife coating process controls coating weight and adhesion at every stage, ensuring consistent GSM and reliable weld strength across rolls.</li> <li>Surface options include banner coated and black back coated, with custom width and length available to match your cutting layout and minimise seams.</li> </ul> <p>Backed by nearly 30 years of PVC coating expertise, a 10-person R&D team, and 100% pre-shipment inspection with full material documentation.</p>

View Details
Technical Grade PVC Coated Fabric for Flatbed Trailer – Knife Coated
PVC Coated Fabric

Technical Grade PVC Coated Fabric for Flatbed Trailer – Knife Coated

<p><strong>PVC Coated Tarpaulin</strong> — knife coated, water resistant, anti-UV and flame retardant, double-faced uniform coating for flatbed trailer and truck transport.</p> <p>Base fabric denier, weave density and coating weight together determine tensile and tear behaviour; knife coating ensures consistent adhesion and weld seam performance at flex points where loads shift most. UV and flame retardant treatments are verified by test documentation matched to the grade quoted.</p> <ul> <li>Roll-to-roll colour and weight consistency controlled across full container shipments</li> <li>10-person R&D team handling custom width, GSM and sample development</li> <li>100% pre-shipment inspection with material specification sheet provided</li> </ul>

View Details
450gsm PVC Coated Tarpaulin – Knife Coated
PVC Coated Fabric

450gsm PVC Coated Tarpaulin – Knife Coated

<p><strong>450gsm Green Heavy-duty Waterproof PVC Tarpaulin</strong> — double-faced coated with anti-UV and flame retardant treatment for truck, construction, and agricultural covering.</p> <p>Base fabric denier and weave construction are controlled alongside coating weight per side, directly determining tensile strength, tear resistance, and weld integrity at flex points. Knife coating ensures consistent adhesion, reducing seam failure under load movement.</p> <ul> <li>Water-resistant and anti-UV treated with verifiable test documentation</li> <li>Flame retardant grade available with certification for site compliance</li> <li>Custom widths, lengths, and colour options with batch consistency across rolls</li> </ul> <p>Every roll undergoes 100% pre-shipment inspection with documented QA records and full material specification sheets provided.</p>

View Details

Ready to Place a Bulk Order or Need a Sample?

Factory-direct pricing · Full QC inspection · 20+ countries shipped · OEM/ODM supported