Technical Grade PVC Coated Fabric – Knife Coated
Technical Grade PVC Coated Fabric – Knife Coated
ISO 9001 ISO 14001 ISO 45001 CE

Technical Grade PVC Coated Fabric – Knife Coated

<p><strong>Heavy Duty PVC Tarpaulin Fabric, 0.35–1.5 mm Thickness, 400–1500 g/m²</strong> — knife coated across medium, heavy and super heavy-duty grades with 500D–2000D base fabric for verified tensile performance.</p> <ul> <li>Coating weight and base denier jointly determine tensile and tear behaviour — selecting the right combination avoids over-specifying GSM where it adds no strength</li> <li>Custom widths, lengths and colour runs produced with batch-to-batch QA, backed by pre-shipment inspection records and material test documentation</li> <li>10-person R&D team supports sample development within days for non-standard widths, finishes or treatment requirements</li> </ul>

Quality
Certified
OEM/ODM
Support
20+ Countries
Exported
+86 137 9310 1270 Reply within 24h

Process-Controlled Coating — Every roll of this technical grade knife coated PVC fabric leaves the line with a documented specification sheet stating base yarn denier, coating weight and measured GSM, so technical buyers can validate material composition on arrival rather than relying on quotation claims alone.

Technical Specifications

Parameter Value
Product Type PVC Coated Tarpaulin Fabric
Coating Material PVC
Base Fabric Denier (Medium) 500D
Base Fabric Denier (Heavy-duty) 1000D
Base Fabric Denier (Super Heavy) 500D–2000D
Total Thickness (Medium) 0.35–0.45 mm
Total Thickness (Heavy-duty) 0.70–1.0 mm
Total Thickness (Super Heavy) 1.2–1.5 mm
Weight (Medium) 400–500 g/m²
Weight (Heavy-duty) 700–1000 g/m²
Weight (Super Heavy) 1100–1500 g/m²
Tensile Strength – Warp (Medium) 1500–2000 N/5cm
Tensile Strength – Weft (Medium) 1200–1800 N/5cm
Tensile Strength – Warp (Heavy-duty) 2000–2500 N/5cm
Tensile Strength – Weft (Heavy-duty) 1800–2200 N/5cm
Tensile Strength – Warp (Super Heavy) 2500–3000 N/5cm
Tensile Strength – Weft (Super Heavy) 2200–2800 N/5cm
Color Options Blue, Blue/Orange, Green, Grey, Black, Clear, Grey/Green, Orange, custom
UV Treatment Available (test basis not stated — request report)
Flame Retardant Available in flame retardant grades — confirm the grade required for your market
Key Features Waterproof, tear resistant, mildew proof, anti-aging, washable
Certification ISO, CE

Application Suitability

Application Exposure & Requirement
Truck side curtain and trailer cover Constant flexing at load points, road debris abrasion, sustained UV and rain exposure
Tensioned membrane and inflatable structure High tensile load under wind uplift, welded seam integrity, long-term weathering
Industrial pipe canopy and equipment enclosure Chemical splash contact, thermal cycling, puncture risk from sharp edges
Tent and awning fabric Repeated fold and unfold cycles, UV degradation, water ingress at stitch lines
Outdoor storage and construction site cover Wind-driven rain, soil contact, mechanical abrasion from bulk material loading

Why PVC Coated Tarpaulin Fabric GSM Alone Does Not Predict Field Performance

Coating weight and base fabric denier together determine how the material behaves under load — neither tells the full story in isolation.

Technical buyers frequently receive PVC coated tarpaulin fabric with a GSM figure on the quotation that does not match the roll arriving at the dock. The discrepancy often comes from a lighter base fabric being compensated with additional coating, which inflates weight without adding tensile or tear resistance. A 700 g/m² roll built on 500D yarn behaves very differently from the same GSM built on 1000D yarn when a truck side curtain flexes through thousands of load cycles. Specifying by GSM without requesting the denier and weave construction leaves the most critical performance variables unverified [NEED_CITE: tensile and tear test methods for coated fabrics per ISO 1421].

PVC coated tarpaulin fabric cross-section showing base yarn and coating layers

How Base Yarn Construction Governs Mechanical Behaviour

The base fabric is the structural skeleton of any PVC coated tarpaulin fabric. Denier indicates the thickness of individual yarns, and a move from 500D to 1000D substantially raises the force required to initiate a tear. Warp and weft density — the number of yarns per centimetre in each direction — then determines how that tear propagates once started. A tightly woven 1000D base resists tear spread far more effectively than a loosely woven fabric of the same denier, which is why tensile data across both axes must be reviewed together rather than comparing a single number.

Coating Thickness, Adhesion and Long-Term Durability

The PVC coating layer provides waterproofing, abrasion resistance and chemical protection, but its contribution depends on adhesion to the base fabric. Knife coating pushes PVC paste into the yarn interstices under controlled pressure, creating a mechanical bond that resists delamination when the material is flexed or welded. Coating thickness from 0.35 mm up to 1.5 mm covers the range from medium-duty covers to super heavy structural membranes. Thicker coatings add abrasion life and improve weld pool formation during hot-air joining, yet they also increase roll weight and handling effort on site [NEED_CITE: coating adhesion and peel strength test standards for technical textiles].

Reading the Specification Sheet Against Project Requirements

Three parameters require close comparison when selecting a grade: denier versus expected tear load, GSM versus handling constraints, and tensile values versus the peak forces the installed fabric will experience. A tensioned canopy in a coastal wind zone demands high warp tensile values and a super heavy grade, while a farmer’s market stall cover prioritises lighter weight for daily setup. Mapping these variables to the application prevents both over-specifying — which adds unnecessary cost and weight — and under-specifying, which leads to premature failure.

PVC coated fabric weave detail showing yarn interlacing and coating penetration

The Hidden Cost of Specifying on Price Per Kilogram

Selecting PVC coated tarpaulin fabric on a cost-per-kilogram basis without verifying construction invites a specific failure pattern: the supplier meets the target GSM by using a lower-denier base and a thicker, softer coating. The roll feels heavy and passes a hand check, but under dynamic loading the weaker base fabric allows tears to propagate rapidly, and the excess coating can delaminate at flex points. Welded seams may fail before the fabric body because the coating layer is too thick relative to the yarn structure. The result is a warranty claim that neither party can resolve because the original purchase order referenced only GSM [NEED_CITE: common failure modes in coated technical fabrics under cyclic loading].

Why Technical Buyers Source This PVC Coated Fabric Here

Three full production lines and 36 sets of professional coating equipment support consistent output across medium, heavy-duty and super heavy grades without batch bottlenecking. A dedicated 10-person R&D team handles material selection, custom colour matching and sample development within days, letting fabricators validate weld parameters and drape behaviour before committing to a production run. QA inspection runs at every coating and lamination stage, with 100% pre-shipment verification of GSM and thickness roll by roll. Nearly 30 years of focused coated-fabric production means the process variables — paste viscosity, oven temperature, knife gap — are controlled from experience rather than adjusted by trial and error.

Documentation & Verification

  • Material specification sheet stating exact GSM, base denier, weave count and coating weight per roll
  • Pre-shipment inspection record with measured thickness and weight against quoted values
  • Test reports for UV and flame retardant grades supplied when applicable to the selected variant
  • ISO and CE certificates included with customs and export documentation
  • Certificate of origin and roll packing list for container load reconciliation

Fabrication, Handling & Storage

  • Hot-air welding temperature must match coating thickness — heavier grades above 1.0 mm need higher air temperature and slower travel speed
  • Store rolls horizontally on racking to prevent flat-spot deformation on the coating surface
  • Eyelet and hem reinforcement should distribute load across multiple yarn courses, not just the coating layer
  • Unroll super heavy grades with mechanical assistance to avoid creasing the 1.2–1.5 mm coating
  • Clean with mild detergent only; solvent-based cleaners may degrade the PVC plasticiser in the coating

What to Include in Your Enquiry

Provide the application scenario, expected mechanical loads and environmental exposure so we can recommend the correct denier, GSM and coating thickness. State your target market’s fire classification or compliance requirements if flame retardant grades are needed. Specify required roll width, colour references and whether you need plain stock or custom-printed branding.

Frequently Asked Questions

Q: How do I verify the quoted GSM against the delivered PVC coated tarpaulin fabric?
A: Every shipment includes a pre-shipment inspection record with roll-by-roll weight and thickness measurements. On arrival, you can cut a measured sample from the roll edge and weigh it on a calibrated scale. The base denier and weave density stated on the material specification sheet give you a second cross-check, because a different base construction would produce a different hand feel and stiffness even at the same GSM.

Q: What UV test documentation is available for outdoor applications?
A: UV treatment is available across the range, but the test basis varies by grade. Before confirming your order, request the specific UV exposure test report for the grade you are selecting. The report will state the test method, exposure duration and retained tensile percentage, letting you judge suitability for your climate and expected service conditions.

Q: How does coating thickness affect hot-air welding of this fabric?
A: Thicker coatings above 1.0 mm require higher hot-air temperature and slower travel speed to fully melt the PVC layer at the seam. Medium grades in the 0.35–0.45 mm range weld quickly but need careful heat control to avoid burning through the thinner coating. We supply sample pieces so fabricators can dial in weld parameters before cutting production panels.

Q: Can colour consistency be maintained across multiple rolls in one order?
A: Colour matching is controlled at the coating paste mixing stage with reference to a master colour standard. All rolls in a single production run use the same paste batch, and QA checks each roll against the reference under controlled lighting. If your project spans multiple orders, request a retained colour swatch from the first batch to align subsequent runs.

Q: Which flame retardant grades are available and how do I specify them?
A: Flame retardant PVC coated tarpaulin fabric is available in several grades to match different regional fire codes. State the classification your project requires — for example, the building material class demanded by your local authority — and we will confirm which grade meets that standard, supported by the corresponding test report before order confirmation.

Accepting Inquiries

Get a Custom Quote for
Technical Grade PVC Coated Fabric – Knife Coated

Fill in your requirements and our sales team will respond within 24 hours with a detailed quotation. We support sample orders, bulk production, and OEM/ODM customization.

01
Submit Inquiry
Describe your needs and quantity
02
Sample Confirmation
We prepare samples for your approval
03
Quotation & Order
Formal quote, contract and payment
04
Production & Ship
Full QC inspection before delivery

Product Inquiry Form

Sending...

By submitting this form, you agree to be contacted by our sales team. We respect your privacy and will never share your information.

Related Products

You May Also Like

620gsm PVC Coated Tarpaulin for Membrane Structure – Laminated Grade
PVC Coated Fabric

620gsm PVC Coated Tarpaulin for Membrane Structure – Laminated Grade

<p><strong>PVC Coated Tarpaulin for Membrane Structure, 400-1500 g/m², 500D-2000D</strong> — laminated and hot melt coated polyester fabric engineered for tensile applications.</p> <ul> <li>100% high toughness polyester yarn base with PVC lamination, delivering controlled coating weight and strong adhesion for weld seam integrity.</li> <li>Anti-static and flame retardant treatments available; waterproof, cold resistant, and mold proof standard across all grades.</li> <li>GSM verified against material specification sheet on delivery, with test reports for all claimed treatments and 100% pre-shipment inspection.</li> </ul>

View Details
PVC Coated Tarpaulin 3 Meter Width | Technical Grade
PVC Coated Fabric

PVC Coated Tarpaulin 3 Meter Width | Technical Grade

<p><strong>PVC Coated Tarpaulin 250gsm-1500gsm, 200D×300D to 1000D×1000D, 3m Width</strong> — waterproof with UV, FR and anti-fungal treatment, glossy or matte surface options</p> <p>Base fabric denier and weave structure determine tensile and tear performance, while coating weight directly influences mechanical strength and heat-weld behavior at seam joints. Material specification sheets confirm GSM and coating adhesion values, with test reports provided for UV and flame-retardant grades where specified.</p> <ul> <li>100% pre-shipment inspection with documented QA records on every roll</li> <li>Dedicated R&D team supporting custom width, color and surface finish requirements</li> <li>ISO and CE certified production across three full coating lines</li> </ul>

View Details
Fireproof Waterproof PVC Coated Fabric for Truck Cargo Cover – Knife Coated
PVC Coated Fabric

Fireproof Waterproof PVC Coated Fabric for Truck Cargo Cover – Knife Coated

<p><strong>Fireproof Waterproof PVC Coated Tarpaulin for Truck Cargo Covers</strong> — knife coated fabric with flame retardant and anti-static treatments, available in 700gsm, 850gsm and 900gsm grades for transport and fleet applications.</p> <ul> <li>Coating weight and base fabric specification verified through in-process QA, with material specification sheet provided per shipment</li> <li>GSM and treatment performance documented with test reports where applicable, ensuring the fabric you receive matches the quotation</li> <li>Batch-to-batch colour consistency maintained across rolls through controlled coating process</li> </ul> <p>Custom widths, lengths and printing supported by a 10-person R&D team with samples developed within days for specification approval.</p>

View Details
PVC Coated Tarpaulin Technical Grade – Knife Coated
PVC Coated Fabric

PVC Coated Tarpaulin Technical Grade – Knife Coated

<p><strong>PVC Coated Tarpaulin</strong> with 250gsm–1500gsm weight range and base fabric denier options from 200DX300D to 1000DX1000D, available in glossy or matte surface finishes.</p> <ul> <li>Knife coating process ensures strong adhesion between PVC layer and base fabric, directly influencing peel strength and heat-weld performance at seam joints.</li> <li>GSM and denier together determine tensile and tear behaviour — selecting the right combination avoids over-specifying weight while meeting strength targets.</li> <li>UV, flame retardant and anti-fungal treatments applied with test documentation supplied per order.</li> </ul> <p>Supported by 100% pre-shipment inspection, dedicated QA at every production stage, and a 10-person R&D team handling material selection and sample development within days.</p>

View Details

Ready to Place a Bulk Order or Need a Sample?

Factory-direct pricing · Full QC inspection · 20+ countries shipped · OEM/ODM supported