PVC Coated Tarpaulin 3 Meter Width – Knife Coated
PVC Coated Tarpaulin 3 Meter Width – Knife Coated
ISO 9001 ISO 14001 ISO 45001 CE

PVC Coated Tarpaulin 3 Meter Width – Knife Coated

<p><strong>PVC Coated Tarpaulin</strong> — 250gsm-1500gsm weight range with 200D to 1000D base fabric options, knife coated for strong adhesion and reliable heat-welding performance. Glossy or matte surface finishes available to match installation requirements and cleaning needs.</p> <ul> <li>UV, flame-retardant and anti-fungal treatments applied to specification</li> <li>Custom sizes from 3x4m to 10x12m or made-to-order dimensions</li> <li>Eco-friendly formulation with working life of 3-10 years depending on environment</li> </ul> <p>Three full production lines and 36 sets of equipment ensure bulk capacity with consistent on-time delivery for roll-stock orders.</p>

Quality
Certified
OEM/ODM
Support
20+ Countries
Exported
+86 137 9310 1270 Reply within 24h

Precision Coating Control — three full production lines maintain consistent PVC adhesion across 3-meter wide rolls, verified at every stage before dispatch.

Technical Specifications

Parameter Value
Product Type PVC Coated Tarpaulin
Weight (GSM) 250gsm–1500gsm (confirm grade for your application)
Base Fabric Denier 200D×300D, 500D×500D, 840D×840D, 1000D×1000D
Coating Material PVC
Coating Method Knife coated and laminated
Roll Width 3 Meter
Finished Size Options 3×4m, 6×8m, 8×10m, 10×12m or custom made
Surface Finish Available in glossy or matte finish
Colour Options Blue, yellow, black, green, white, and others on request
Temperature Range -15°C to 70°C
UV Treatment Customized — confirm the UV grade required for your market
Flame Retardant Treated — available in flame retardant grades, confirm the standard for your region
Anti-Mildew Anti-fungal treated
Waterproof Rating Waterproof, rain-resistant construction
Working Life 3–10 years depending on usage environment
Environmental Profile Eco-friendly formulation
Standards ISO, CE certified production

Application Suitability

Application Exposure & Requirement
Truck and train tarpaulin Constant road vibration, wind flexing, UV exposure, abrasion at tie-down points
Side curtain systems Repeated rolling and folding, lateral tension, weld seam integrity under dynamic load
Top cover materials Direct rainfall, pooling water, thermal expansion and contraction cycles
Sunshade and protection awning Prolonged solar exposure, wind uplift forces, structural tension at mounting brackets
Swimming pool covers Continuous moisture contact, chlorine or chemical splash, seasonal handling and folding

Why GSM and Denier Together Define True PVC Coated Tarpaulin Performance

A quoted GSM figure means little without the base fabric denier behind it — both must match your load and flex conditions.

When a roll arrives on the dock, the first check is weight. But two fabrics at the same GSM can behave completely differently under tension if one uses a 200D×300D base and the other a 1000D×1000D base. The denier determines how the load distributes across the yarn intersections, while the PVC coating weight fills the gaps and provides the barrier properties. Specifying PVC coated tarpaulin by GSM alone leaves the structural backbone undefined, which is why technical buyers cross-reference both values before approving a grade. [NEED_CITE: tensile and tear test methods for coated fabrics per ISO 1421]

PVC coated tarpaulin fabric roll in 3 meter width showing knife coated surface

How the Base Fabric Weave Dictates Tensile Behaviour

The denier options in this range — from 200D×300D up to 1000D×1000D — represent fundamentally different yarn thicknesses woven into the scrim. A higher denier means thicker individual yarns, which resist tearing propagation more effectively because each yarn intersection carries a larger share of the load. For PVC coated tarpaulin used in side curtain applications where the fabric undergoes repeated lateral flexing, the 840D×840D or 1000D×1000D base fabrics maintain structural continuity far longer than lighter deniers under identical stress cycles.

Coating Method and Its Effect on Seam Adhesion

Knife coating forces PVC paste into the weave under blade pressure, filling interstices and creating a mechanical lock between coating and yarn. Lamination bonds a pre-formed PVC film to the scrim using heat and pressure. Each method produces a different surface profile that directly affects hot air welding parameters — knife coated surfaces typically require higher temperature settings to achieve full fusion at the overlap, while laminated surfaces may bond at lower temperatures but demand precise speed control. The PVC coated tarpaulin in this range is available through both processes. [NEED_CITE: hot air welding parameters for PVC coated polyester fabrics]

Reading the Specification Sheet Beyond the Headline Number

The 250gsm–1500gsm range spans lightweight awning fabric through to heavy-duty truck cover material, and the correct grade depends on the mechanical demand of the end use. A 500D×500D base at a mid-range GSM provides balanced performance for general-purpose covers, while a 1000D×1000D base at higher GSM delivers the tear resistance needed for tensioned structures. The glossy or matte finish selection influences not only appearance but also surface friction during fabrication and dirt retention in service. The -15°C to 70°C operating range means the PVC formulation remains flexible in cold weather without becoming tacky at elevated temperatures, which matters for rolls shipped across climate zones. Base fabric denier and PVC coating weight together determine weld seam peel strength — a critical factor when the seam, not the fabric body, becomes the failure point under load.

Cross-section detail of PVC coating layers bonded to polyester base fabric weave

What Happens When the Specification Does Not Match the Load

A fabric specified too light for its application reveals the mismatch not in the centre of the panel but at the stress concentration points — where eyelets pull through, where tie-down straps bear against the surface, and where welded seams flex repeatedly. Colour inconsistency between rolls in the same shipment becomes visible only after panels are installed side by side on a truck or awning frame, forcing costly rework. Flame retardant treatment claimed without a referenced test standard can result in failed site inspections, particularly in mining and construction ventilation where compliance documentation is checked before installation. These failures trace back to incomplete specification at the inquiry stage, not to manufacturing defects. [NEED_CITE: common failure modes in PVC coated fabric installations]

Production Capability Aligned with Technical Fabric Requirements

The 10-person R&D team handles material selection and sample development for custom denier and GSM combinations, producing trial rolls within days rather than weeks. Three full production lines with 36 sets of professional equipment support the 3-meter coating width required for large-format panels without mid-width joins. Dedicated QA and QC inspection at every production stage catches GSM deviation and colour drift before rolls leave the facility. The knife coating and lamination processes are controlled for consistent PVC adhesion, which directly affects the peel strength at welded seams in finished products. Nearly 30 years of coated fabric production experience underpins the process parameters that determine how the material behaves on your fabrication table.

Documentation & Verification

  • Material specification sheet stating GSM, base fabric denier, and coating weight for each roll dispatched
  • UV and flame retardant test reports referencing the applicable standard for your market
  • Pre-shipment inspection record confirming weight and colour consistency across the order
  • ISO and CE certificates included with shipping documentation
  • Certificate of origin and customs documentation prepared per destination country

Fabrication, Handling & Storage

  • Hot air welding temperature must be calibrated to the glossy or matte surface finish selected
  • Knife coated PVC surfaces require adjusted dwell time compared to laminated finishes for full seam fusion
  • Store 3-meter rolls upright on end cores to prevent flat-spotting and permanent creasing
  • Allow cold-stored rolls to reach workshop temperature before unrolling to avoid surface cracking below -15°C
  • Anti-fungal treatment maintains coating integrity in humid storage conditions before fabrication
  • Cutting layout should account for the full 3-meter width to minimise offcut waste on large panels

What to Include in Your Enquiry

To match the correct denier and GSM grade to your application, provide the end-use environment including UV exposure level, temperature extremes, and mechanical load conditions. Specify whether you require roll stock for your own fabrication line or finished cut-to-size panels with edge reinforcement. Confirm the fire safety or regulatory standard applicable in your destination market so that flame retardant treatment can be specified to the correct grade. Indicate your target roll width, colour preference, and annual volume to support accurate lead time and production planning.

Frequently Asked Questions

Q: How can I verify the GSM of PVC coated tarpaulin matches the quotation on arrival?
A: Request the pre-shipment inspection record that lists measured GSM per roll. On receipt, cut a measured sample from the roll edge, weigh it on a calibrated scale, and compare against the stated specification. Any significant deviation should be reported immediately with photographs before fabrication begins.

Q: Which flame retardant standard applies to my market for this PVC coated tarpaulin?
A: Flame retardant grades vary by region — European markets typically reference DIN 4102 classifications, while other regions use different frameworks. Confirm the specific standard required for your application and request a test report referencing that standard before placing the production order.

Q: How does glossy versus matte finish affect hot air welding?
A: Glossy PVC surfaces generally require slightly different temperature and speed settings than matte finishes to achieve full seam fusion. Request welding parameter guidance for the specific finish you select, and run test welds on offcuts before committing to production panels.

Q: Can I order custom widths within the 3-meter coating capability without high minimums?
A: The 3-meter knife coating line supports custom slit widths from the master roll. Minimum order quantities depend on the denier and GSM combination selected. Provide your required finished width and length per roll to receive a production plan and lead time estimate.

Q: What causes colour variation between rolls and how is it controlled?
A: Colour drift can occur when pigment batches differ or coating thickness varies across production runs. Each order is matched to a colour reference, and pre-shipment inspection checks consistency roll by roll. For large installations, request that all panels for one project are produced in a single batch.

Accepting Inquiries

Get a Custom Quote for
PVC Coated Tarpaulin 3 Meter Width – Knife Coated

Fill in your requirements and our sales team will respond within 24 hours with a detailed quotation. We support sample orders, bulk production, and OEM/ODM customization.

01
Submit Inquiry
Describe your needs and quantity
02
Sample Confirmation
We prepare samples for your approval
03
Quotation & Order
Formal quote, contract and payment
04
Production & Ship
Full QC inspection before delivery

Product Inquiry Form

Sending...

By submitting this form, you agree to be contacted by our sales team. We respect your privacy and will never share your information.

Related Products

You May Also Like

Flame-Retardant PVC Coated Tarpaulin 420~1000g/m² – Technical Grade
PVC Coated Fabric

Flame-Retardant PVC Coated Tarpaulin 420~1000g/m² – Technical Grade

<p><strong>Flame-Retardant PVC Coated Tarpaulin, 350–900 g/m², 500D–2000D Polyester Base</strong> — double-sided PVC coating on a high-tenacity woven substrate, with verified GSM at every production stage and flame-retardant treatment supported by test documentation.</p> <ul> <li>Base fabric denier matched to tensile load, not just weight</li> <li>Heat-sealed seams engineered to outlast fabric at flex points</li> <li>Roll-by-roll colour and GSM checked before dispatch</li> <li>Samples developed within days for custom weight and sizing</li> <li>100% pre-shipment inspection with material spec sheet included</li> </ul>

View Details
PVC Coated Tarpaulin 500gsm 600gsm | Technical Grade
PVC Coated Fabric

PVC Coated Tarpaulin 500gsm 600gsm | Technical Grade

<p><strong>PVC Coated Tarpaulin</strong> with 500gsm to 900gsm weight options and flame retardant, anti-static, anti-cold, anti-mildew treatments — knife coated on high-density polyester base fabric for controlled GSM and adhesion across every roll.</p> <ul> <li>Coating weight and base fabric denier jointly determine tensile and tear strength, verified at each production stage</li> <li>Treatment options supported by test reports matching site compliance for fire-retardant grade and anti-static certification</li> <li>Custom width, colour matching, and pattern printing with batch-to-batch consistency</li> </ul> <p>3 full production lines and 100% pre-shipment inspection ensure every roll meets your quoted specification before dispatch.</p>

View Details
PVC Coated Tarpaulin Fabric Knife Coated Grade for Tents and Truck Covers
PVC Coated Fabric

PVC Coated Tarpaulin Fabric Knife Coated Grade for Tents and Truck Covers

<p><strong>PVC Coated Tarpaulin Fabric, 100% PES Dipping, 400-1500 g/m²</strong> — available in knitting or plain weave construction with thickness from 0.35 mm to 1.5 mm, supporting roll widths up to 6m.</p> <p>Base fabric denier and coating weight jointly determine tensile and tear performance, not GSM alone. The 100% PES dipping process ensures consistent coating adhesion, directly affecting weld strength at seams where loads flex most.</p> <ul> <li>Three weight classes from medium to super heavy for truck covers, tents and tensioned structures</li> <li>UV and flame-retardant treatment available with test-report-backed verification</li> <li>Roll-to-roll colour and weight consistency across bulk orders</li> </ul> <p>Backed by nearly 30 years of coating process control and 100% pre-shipment inspection on every roll.</p>

View Details
PVC Coated Tarpaulin for Dump Trailer – Knife Coated
PVC Coated Fabric

PVC Coated Tarpaulin for Dump Trailer – Knife Coated

<p><strong>PVC Coated Tarpaulin</strong> for dump trailer — 250gsm–1500gsm, 200D×300D to 1000D×1000D base, waterproof with UV and FR treatment options</p> <p>Base fabric denier and coating weight together determine tensile and tear performance. Knife coating ensures strong adhesion and reliable heat-welded seams at flex points where loads shift most.</p> <ul> <li>Custom sizing, colour and surface finish available per roll or cut sheet</li> <li>100% pre-shipment inspection with full documentation</li> <li>Nearly 30 years of coating process control backing every order</li> </ul>

View Details

Ready to Place a Bulk Order or Need a Sample?

Factory-direct pricing · Full QC inspection · 20+ countries shipped · OEM/ODM supported