Gray Flame-Retardant PVC Coated Tarpaulin 420~1000g/m² – Technical Grade
Gray Flame-Retardant PVC Coated Tarpaulin 420~1000g/m² – Technical Grade
ISO 9001 ISO 14001 ISO 45001 CE

Gray Flame-Retardant PVC Coated Tarpaulin 420~1000g/m² – Technical Grade

<p><strong>Gray Flame-Retardant PVC Coated Tarpaulin, 350~900 g/m², 500D~2000D Polyester Base</strong> — double-side coated with flame-retardant and anti-UV treatment for controlled performance in demanding environments.</p> <ul> <li>Weight and yarn denier jointly determine tensile and tear behaviour — select GSM matched to load stress, not maximum weight alone</li> <li>Heat-sealed seamless edge wrapping with 5mm rope and reinforced 3cm aluminium eyelets prevent failure at flex and tie-down points</li> </ul> <p>Supported by 10-person R&D for custom width, colour and sample development within days, plus 100% pre-shipment inspection on every roll.</p>

Quality
Certified
OEM/ODM
Support
20+ Countries
Exported
+86 137 9310 1270 Reply within 24h

Material Consistency — every roll of PVC coated tarpaulin verified against stated GSM, base fabric denier, and coating weight before it leaves the line.

Technical Specifications

Parameter Value
Product Type PVC Coated Tarpaulin
Coating Material PVC double-sided coating on polyester base fabric
Yarn Count Options 500D×840D / 1000D×1000D / 1000D×1300D / 1300D×1300D / 1000D×2000D
Mesh Density 20×20 / 30×15 / 30×19
Weight Range 350 / 400 / 420 / 500 / 600 / 650 / 750 / 900 g/m²
Thickness Range 0.29 / 0.32 / 0.38 / 0.44 / 0.46 / 0.55 / 0.65 mm
Tensile Strength (Warp) 1650–3900 N (test basis not stated in source)
Tensile Strength (Weft) 1600–3500 N (test basis not stated in source)
Flame Retardant Flame retardant grade available — confirm the grade required for your market
UV Treatment Anti-UV treatment applied (test basis not stated in source)
Waterproof Fully waterproof coated construction
Brittle Temperature ≤ −50 to −60 °C
Softening Temperature ≥ 80 °C
Color Gray
Edge Construction 5 mm rope hem, high-temperature heat-sealed seamless edge wrapping
Eyelets 3 cm enlarged aluminum alloy buttonhole with reinforced corners
Certifications ISO, CE

Application Suitability

Application Exposure & Requirement
Truck side curtains and trailer covers Constant flexing at load points, road abrasion, UV exposure, weather sealing
Industrial machine and equipment covers Dust ingress, outdoor weathering, repeated draping and removal
Tent and awning panels Wind load tension, prolonged sun exposure, rain shedding, flame-retardant compliance for public venues
Pergola and canopy rain covers Permanent outdoor mounting, UV degradation, pooling water load
Groundsheets and construction site covers Puncture from aggregate, soil moisture, foot traffic abrasion
Balcony and window rainproof screens Wind-driven rain, residential aesthetic, lightweight handling

Why Coating Weight Matters More Than Total GSM for PVC Coated Tarpaulin

Total GSM alone tells you nothing about how the PVC coated tarpaulin will behave under load or after seasons of sun exposure.

Buyers frequently quote a target GSM, receive rolls that match the scale reading, and still experience premature coating delamination or weld-line failure. The reason is that two fabrics can share the same total weight while carrying very different ratios of base fabric to coating. A heavier base yarn with a thinner coat reaches the same GSM as a lighter yarn buried under thick PVC, yet the tensile and peel behaviour diverge sharply. Technical buyers specifying PVC coated tarpaulin base fabric denier, coating weight, and GSM tensile strength relationships need the breakdown, not just the sum. [NEED_CITE: coating-to-substrate weight ratio and peel strength per ISO 2411]

PVC coated tarpaulin cross-section showing polyester base fabric and double-sided PVC coating layers

How Base Fabric Denier Governs Structural Capacity

The polyester base fabric carries virtually all the tensile and tear load; the PVC coating contributes weather protection and surface durability. When the yarn count steps up from 500D×840D to 1000D×2000D, the individual filament diameter increases substantially, raising both warp and weft breaking force. Mesh density compounds this effect — a 30×19 weave packs more yarns per unit area than a 20×20 weave, distributing point loads across a wider yarn network. Specifiers comparing grades should read denier and density together, because a high-denier yarn in a sparse weave can underperform a mid-denier yarn in a tight weave under tear propagation.

PVC Coating Weight and Its Effect on Weld Behaviour

Coating thickness directly influences how the fabric responds to hot-air or wedge welding during fabrication. Thicker PVC layers require more heat energy and longer dwell time to reach fusion temperature without scorching the polyester substrate underneath. If the weld temperature is too low, the joint peels before the fabric reaches its rated tensile value. If it is too high, the coating degrades and the seam becomes brittle. Across the 0.29 mm to 0.65 mm thickness range offered here, welding parameters must be adjusted per grade. Fabricators running multiple GSM grades on the same production line benefit from material specification sheets that state coating weight separately from base fabric weight. [NEED_CITE: hot-air welding parameters for PVC coated polyester fabrics]

Reading the Thickness-to-GSM Correlation

Each thickness step in this product family corresponds to a specific GSM band, and the relationship is not perfectly linear because base fabric construction varies between grades. The 0.29 mm option sits at the lighter end, suited to applications where drapability and low roll weight matter more than puncture resistance. At 0.65 mm, the fabric carries enough PVC mass to resist abrasion and withstand repeated flexing at tie-down points. Thickness also affects low-temperature handling — the stated brittle temperature of −50 to −60 °C applies to the PVC compound, but stiffer heavy-grade rolls demand more care during cold-weather unfolding to avoid crease damage.

Close-up of polyester weave structure visible through translucent PVC coating layer

The Hidden Cost of Specifying on GSM Alone

When a buyer approves a PVC coated tarpaulin based only on a GSM figure, several failure modes go unaddressed. A roll that meets weight but uses a sparse weave will show lower tear resistance than expected, and the first sign is a rip propagating from an eyelet under wind load. Coating adhesion, measured as peel strength between PVC and polyester, is invisible on a scale yet determines whether the fabric survives repeated folding. Colour inconsistency between rolls in the same shipment becomes visible only after installation, when panels sit side by side on a truck curtain or pergola frame. Each of these issues traces back to incomplete specification rather than faulty material. [NEED_CITE: common failure modes in coated fabric field returns]

Why Technical Buyers Source This PVC Coated Fabric Here

Three full production lines and 36 sets of professional equipment run dedicated PVC coating processes, giving consistent coating weight control across large-volume roll orders. The 10-person R&D team develops custom GSM grades, colour matches, and width options with samples produced within days rather than weeks. Every roll passes 100 percent inspection before dispatch, with a pre-shipment record documenting actual measured GSM against the purchase order specification. ISO and CE certification underpins the quality management system, and documentation packages include material specification sheets that break down base fabric denier, coating weight, and mesh density for each roll shipped. Buyers receive the test report relevant to their specified flame-retardant or anti-UV grade rather than a generic certificate.

Documentation & Verification

  • Material specification sheet stating GSM, base fabric denier, and PVC coating weight per roll
  • Flame-retardant test report matched to the grade specified on the purchase order
  • Pre-shipment inspection record with measured GSM and thickness values
  • ISO and CE certificates included in the shipping documentation package
  • Colour reference standard and batch consistency record for multi-roll orders
  • Certificate of origin and customs documentation for export clearance

Fabrication, Handling & Storage

  • Heat-seal welding parameters must be adjusted for each thickness grade from 0.29 mm to 0.65 mm to avoid coating scorch or cold joints
  • The 3 cm aluminum alloy eyelets with reinforced corners distribute tie-down loads, but grommet spacing should tighten on heavier GSM grades under wind load
  • Store rolls upright on pallets to prevent flat-spotting the PVC coating, especially on softer grades in warm warehouse conditions
  • Unfold heavy-grade rolls in temperatures above 5 °C to stay within the material’s ductile range and avoid crease whitening
  • Clean the PVC surface with mild detergent only; solvent-based cleaners attack the plasticiser in the coating compound
  • Off-cut edges should be heat-sealed immediately after cutting to prevent moisture wicking into the polyester base fabric

What We Need to Quote Your PVC Coated Fabric Accurately

Provide the intended application and the environmental exposure conditions — particularly whether flame-retardant compliance is required and which standard your destination market enforces. Confirm the GSM grade or the tensile strength target you need, along with roll width and estimated annual volume so we can map production scheduling. If you require finished cut sizes with specific eyelet spacing or edge reinforcement, share the panel dimensions and a drawing if available.

Frequently Asked Questions

Q: How do I verify the GSM of PVC coated tarpaulin on arrival matches the quoted specification?
A: Each roll ships with a pre-shipment inspection record showing measured GSM and thickness. On receipt, cut a known-area sample from the roll end and weigh it on a calibrated scale. Compare the result against the material specification sheet provided in the documentation package. Any discrepancy beyond normal tolerance should be flagged before fabrication begins.

Q: Which flame-retardant grade should I specify for my market?
A: Fire codes differ by region and application — construction membrane structures, mining ventilation, and public-event tents each have distinct requirements. Confirm the exact standard your project demands, such as DIN 4102, NFPA 701, or a local building code classification, and we will supply the matching test report with your shipment documentation.

Q: How does yarn denier affect real-world performance of PVC coated fabric?
A: Higher denier yarns increase individual filament diameter, raising both tensile breaking force and tear propagation resistance. A 1000D×2000D base fabric handles substantially higher mechanical stress than a 500D×840D construction. For applications involving wind load, tie-down tension, or repeated flexing at seams, specify the denier and mesh density together rather than relying on GSM alone.

Q: What controls batch-to-batch colour consistency across multiple roll orders?
A: Production uses a recorded colour reference standard for each order, with in-process QA checks against that reference throughout the coating run. The pre-shipment documentation includes a batch consistency record. For installations where panels sit side by side, we recommend ordering the full project quantity in a single production run to minimise shade variation.

Q: How should I adjust welding parameters when switching between GSM grades?
A: Thicker PVC coatings require higher heat input and longer dwell time to reach fusion temperature without degrading the polyester base. When moving between grades in the 0.29 mm to 0.65 mm range, run test welds on off-cuts first and perform peel tests to confirm joint strength meets or exceeds the fabric tensile value before committing to production panels.

Accepting Inquiries

Get a Custom Quote for
Gray Flame-Retardant PVC Coated Tarpaulin 420~1000g/m² – Technical Grade

Fill in your requirements and our sales team will respond within 24 hours with a detailed quotation. We support sample orders, bulk production, and OEM/ODM customization.

01
Submit Inquiry
Describe your needs and quantity
02
Sample Confirmation
We prepare samples for your approval
03
Quotation & Order
Formal quote, contract and payment
04
Production & Ship
Full QC inspection before delivery

Product Inquiry Form

Sending...

By submitting this form, you agree to be contacted by our sales team. We respect your privacy and will never share your information.

Related Products

You May Also Like

Knife Coated PVC Coated Tarpaulin Fabric – Technical Grade
PVC Coated Fabric

Knife Coated PVC Coated Tarpaulin Fabric – Technical Grade

<p><strong>Knife Coated PVC Tarpaulin, Flame Retardant & Anti-UV</strong> — delivered in lightweight to heavy-duty grades with custom sizing options.</p> <ul> <li>Knife coating ensures consistent GSM roll-to-roll by controlling coating weight and adhesion at every stage.</li> <li>Base fabric denier and weave density work together with coating to determine tensile and tear strength.</li> <li>Supported by a 10-person R&D team handling material selection, custom widths, and treatment specifications from three full production lines.</li> </ul>

View Details
Heavy Duty PVC Coated Tarpaulin 3 Meter Width – Technical Grade
PVC Coated Fabric

Heavy Duty PVC Coated Tarpaulin 3 Meter Width – Technical Grade

<p><strong>Heavy Duty PVC Coated Tarpaulin</strong> 250gsm-1500gsm, 200D×300D to 1000D×1000D base fabric — base denier and weave pattern determine tensile and tear strength independent of coating weight, while knife-over-roll coating controls adhesion and flex life at welded seams. UV and flame-retardant additives require verified test reports matched to the exact product code.</p> <ul> <li>Glossy or matte surface, waterproof with anti-fungal treatment, temperature range -15°C to 70°C</li> <li>Custom widths and cut sizes with colour consistency confirmed across rolls before dispatch</li> <li>100% pre-shipment inspection with GSM verification against material spec sheet before cutting begins</li> </ul>

View Details
PVC Coated Tarpaulin for Dump Trailer – Knife Coated
PVC Coated Fabric

PVC Coated Tarpaulin for Dump Trailer – Knife Coated

<p><strong>PVC Coated Tarpaulin</strong> for dump trailer — 250gsm–1500gsm, 200D×300D to 1000D×1000D base, waterproof with UV and FR treatment options</p> <p>Base fabric denier and coating weight together determine tensile and tear performance. Knife coating ensures strong adhesion and reliable heat-welded seams at flex points where loads shift most.</p> <ul> <li>Custom sizing, colour and surface finish available per roll or cut sheet</li> <li>100% pre-shipment inspection with full documentation</li> <li>Nearly 30 years of coating process control backing every order</li> </ul>

View Details
Laminated PVC Coated Fabric for Poultry Curtains – Anti-Static
PVC Coated Fabric

Laminated PVC Coated Fabric for Poultry Curtains – Anti-Static

<p><strong>PVC Coated Waterproof Anti-Static Tarpaulin for Poultry Curtains</strong> — 350gsm to 750gsm, high-strength polyester mesh base, hot-melt laminated for consistent coating weight and adhesion. Anti-static treatment verified by test report, with double-sided waterproof performance and cold-crack resistance for agricultural enclosures.</p> <ul> <li>Available in 2m × 75m and 2.1m × 50m rolls, custom widths on request</li> <li>Glossy or matte surface, batch-to-batch color consistency confirmed before dispatch</li> </ul>

View Details

Ready to Place a Bulk Order or Need a Sample?

Factory-direct pricing · Full QC inspection · 20+ countries shipped · OEM/ODM supported